[App_rpt-users] how do I change default port from 4569 to 4568 on node?

[REDBUTTON_CTRL]

  Perfect! works like a champ. I'm glad it is something simple. Didnt 
know you could specify the port too. :-)

Thanks!

Jon

On 10/2/2010 4:44 PM, Steve Henke wrote:
> Just change the Account's Host entry to the form:
>
> ServerHostAddress:NonStdPortNum
>
> e.g. w9sh.xelatec.com:4567 or 192.168.1.10:4567
>
> 73,
>
> Steve, W9SH
>
>>    OK well I made the changes to IAX.conf and the portal server setting
>> and works fine here. One thing I found though doing the bind thing is
>> IAX_RPT wont connect to that node now. Not sure if its something to do
>> with IAXRPT or do I have to change something else to get that working
>> again?
>> Perhaps Steve W9SH can comment on that.
>>
>> I am using a linksys WRT54GL router with DDWRT on it. Do you know it it
>> will do PAT??
>> Would be nice to know.
>> Thanks,
>>
>> Jon
>>
>> On 10/2/2010 3:44 PM, Ken wrote:
>>> Actually - there is one other approach besides bind port - advice that
>>> was
>>> given to me - was to get a router that supports PAT.
>>>
>>> That way the configuration in the various computers stays the same.
>>>
>>> Port Address Translation allows you to have different ports on the
>>> same node
>>> on the WAN side and all the SAME port on the LAN side - but with
>>> different
>>> node numbers.
>>>
>>> I suppose, had I known better at the time, I would have gone for the
>>> "free"
>>> solution.  But the new router lets me run my local system at 1Gb,
>>> which is
>>> nice, as I have 3 Linux boxes (so far) and 3-5 PCs on the network.
>>> It's kind
>>> of addictive .....
>>>
>>>
>>> 73
>>>
>>> Ken
>>>
>>>
>>>> -----Original Message-----
>>>> From: Ken [mailto:ke2n at cs.com]
>>>> Sent: Saturday, October 02, 2010 12:01 PM
>>>> To: 'jrorke at cogeco.ca'
>>>> Subject: RE: [App_rpt-users] how do I change default port from 4569
>>>> to
>>>> 4568 on node?
>>>>
>>>> You need to make a 'new' server for the new computer and you can
>>>> specify whatever port you want there at the portal config.
>>>> Nothing needs to be done by the system admins any more
>>>> GL
>>>> Ken
>>>>
>>>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at qrvc.com
>> http://qrvc.com/mailman/listinfo/app_rpt-users
>>
>