[App_rpt-users] how do I change default port from 4569 to 4568 on node?

[Steve Henke]

Just change the Account's Host entry to the form:

ServerHostAddress:NonStdPortNum

e.g. w9sh.xelatec.com:4567 or 192.168.1.10:4567

73,

Steve, W9SH

>   OK well I made the changes to IAX.conf and the portal server setting
> and works fine here. One thing I found though doing the bind thing is
> IAX_RPT wont connect to that node now. Not sure if its something to do
> with IAXRPT or do I have to change something else to get that working
> again?
> Perhaps Steve W9SH can comment on that.
>
> I am using a linksys WRT54GL router with DDWRT on it. Do you know it it
> will do PAT??
> Would be nice to know.
> Thanks,
>
> Jon
>
> On 10/2/2010 3:44 PM, Ken wrote:
>> Actually - there is one other approach besides bind port - advice that
>> was
>> given to me - was to get a router that supports PAT.
>>
>> That way the configuration in the various computers stays the same.
>>
>> Port Address Translation allows you to have different ports on the
>> same node
>> on the WAN side and all the SAME port on the LAN side - but with
>> different
>> node numbers.
>>
>> I suppose, had I known better at the time, I would have gone for the
>> "free"
>> solution.  But the new router lets me run my local system at 1Gb,
>> which is
>> nice, as I have 3 Linux boxes (so far) and 3-5 PCs on the network.
>> It's kind
>> of addictive .....
>>
>>
>> 73
>>
>> Ken
>>
>>
>>> -----Original Message-----
>>> From: Ken [mailto:ke2n at cs.com]
>>> Sent: Saturday, October 02, 2010 12:01 PM
>>> To: 'jrorke at cogeco.ca'
>>> Subject: RE: [App_rpt-users] how do I change default port from 4569
>>> to
>>> 4568 on node?
>>>
>>> You need to make a 'new' server for the new computer and you can
>>> specify whatever port you want there at the portal config.
>>> Nothing needs to be done by the system admins any more
>>> GL
>>> Ken
>>>
>>>
>>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at qrvc.com
> http://qrvc.com/mailman/listinfo/app_rpt-users
>