[App_rpt-users] Finally, GPIO signals on a USB device!!!
Jim Duuuude
telesistant at hotmail.com
Sun Oct 10 19:42:50 UTC 2010
Probably the easiest to follow the instructions in the following:
https://allstarlink.org/support.html#astupgrade
> Date: Sun, 10 Oct 2010 19:37:36 +0100
> From: specialq.que at ntlworld.com
> To: app_rpt-users at qrvc.com
> Subject: Re: [App_rpt-users] Finally, GPIO signals on a USB device!!!
>
> Hello Jim,
>
> Can you please post the necessary steps to obtain and install said file
> in simple terms please.
>
> Thank you,
> D
>
>
> On 10/10/2010 19:30:49, Jim Duuuude (telesistant at hotmail.com) wrote:
> > I discovered (not with any help from the lack of documentation from
> C-media) that the 'HOOK' signal is
> > actually available to be read (but not written). Therefore, the
> "GPIO2" signal can at least now be used
> > as an input.
> >
> > The code revision (chan_usbradio.c) to support this should be
> available via SVN at abut 12:15 PDT today (when the public
> > SVN server updates).
> >
> > Well, it's better then nothing......
> >
> > JIM WB6NIL
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at qrvc.com
> http://qrvc.com/mailman/listinfo/app_rpt-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20101010/5bad0f31/attachment.html>
More information about the App_rpt-users
mailing list