[App_rpt-users] Finally, GPIO signals on a USB device!!!

[Randy Hammock]

I've tried several times to use the procedure outlined in the link
provided below. As far as I know, I've applied the "special" patches
that are supposed to allow wget to download the svn-trunk.tar.gz file
on a Limey Linux box (brand new install) to no avail. Transcript
follows:

[root at test usr]# wget http://allstarlink.org/svn-trunk.tar.gz
--19:52:24--  http://allstarlink.org/svn-trunk.tar.gz
           => `svn-trunk.tar.gz'
Resolving allstarlink.org... 67.215.233.179
Connecting to allstarlink.org|67.215.233.179|:80... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: https://allstarlink.org/svn-trunk.tar.gz [following]
https://allstarlink.org/svn-trunk.tar.gz: Unsupported scheme.

This is on LL:

Limey-linux micro linux distribution version 1.1.0

I usually end up downloading the svn-trunk.tar.gz on another system
then scp over to the Limey Linux box I'm building.

Basically, I'm rebuilding node 2065/2066 for CalNet to bring them up
to the latest version. It will be manual configuration (Jim knows
why).

Any Ideas why wget won't work to get the latest stuff?


On Sun, Oct 10, 2010 at 12:42 PM, Jim Duuuude <telesistant at hotmail.com> wrote:
> Probably the easiest to  follow the instructions in the following:
>
> https://allstarlink.org/support.html#astupgrade
>
>> Date: Sun, 10 Oct 2010 19:37:36 +0100
>> From: specialq.que at ntlworld.com
>> To: app_rpt-users at qrvc.com
>> Subject: Re: [App_rpt-users] Finally, GPIO signals on a USB device!!!
>>
>> Hello Jim,
>>
>> Can you please post the necessary steps to obtain and install said file
>> in simple terms please.
>>
>> Thank you,
>> D
>>
>>
>> On 10/10/2010 19:30:49, Jim Duuuude (telesistant at hotmail.com) wrote:
>> > I discovered (not with any help from the lack of documentation from
>> C-media) that the 'HOOK' signal is
>> > actually available to be read (but not written). Therefore, the
>> "GPIO2" signal can at least now be used
>> > as an input.
>> >
>> > The code revision (chan_usbradio.c) to support this should be
>> available via SVN at abut 12:15 PDT today (when the public
>> > SVN server updates).
>> >
>> > Well, it's better then nothing......
>> >
>> > JIM WB6NIL
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at qrvc.com
>> http://qrvc.com/mailman/listinfo/app_rpt-users
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at qrvc.com
> http://qrvc.com/mailman/listinfo/app_rpt-users
>
>



-- 
Randy Hammock KC6HUR
http://kc6hur.net/~rhammock
IRLP 4494 / ALLSTAR 2035