[App_rpt-users] regenerate dtmf touchtones

[Neal Garbenis]

Ken thanks for the tip but the controller on the other end is not asterisk.  That is my problem I can't get them to pass through without being muted

Thanks 
Neal

Sent from my iPhone

On Apr 1, 2011, at 8:24 PM, "Ken" <ke2n at cs.com> wrote:

> If “the controller” on the other end is Asterisk, then  you can use the “remote command” feature
> 
>  
> 
> http://ohnosec.org/drupal/node/21
> 
>  
> 
> You do *4 and the remote node number as the “command”.
> 
> After that, the next command you send to your local node gets passed through to the remote node - and executed there.
> 
>  
> 
> GL
> 
>  
> 
> Ken
> 
> KE2N
> 
>  
> 
>  
> 
>  
> 
> From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Neal Garbenis
> Sent: Friday, April 01, 2011 7:08 PM
> To: app_rpt-users at ohnosec.org
> Subject: [App_rpt-users] regenerate dtmf touchtones
> 
>  
> 
> Is it possible to send or regenerate a dtmf tone  across a link without being muted.  I want to be able to control a linker II controller over the link if possible.  I have tried the ilink dtmf commands set up in macros with no success. They don’t make it through to the controller  I am trying to control on the other end.
> 
>  
> 
> Thanks
> 
> Neal
> 
> NG8Y
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20110401/67235a07/attachment.html>