[App_rpt-users] MDC Status Reply not working with XTS model radios

[Paul J. Agamata]

I have the same issues between two radios.  My XTS-5000 responds properly
but my XTS-3000 does not.  I'll do some digging this weekend to see where
the issue is.  Because my XTS-5000 functions properly, it's probably a
codeplug issue.

Paul

On 8/12/11 4:18 PM, "Tony KT9AC" <kt9ac at ameritech.net> wrote:

>This might not be a widely-used feature, but I wanted to post it here
>first versus directly to Jim (to follow the rules).
>
>There is a feature within App_rpt where you can send MDC1200 status
>messages and have commands acted upon. I've used a MCS2000 mobile and
>Astro Saber successfully for a very fast and efficient control method.
>Recently I sold my Astro Saber and bought an XTS3000. I can still send
>MDC statuses and get them acted upon, but no longer get the "ACK" back
>from Allstar.
>
>No changes in software and the logs show the op=46 like before and the
>proper Unit ID and status sent...so I'm at a loss of why Allstar stops
>trying to ACK these statuses for this one type of radio (my mobile still
>works fine). Debug suggestions and code testing welcome.
>
>Thanks,
>Tony
>
>_______________________________________________
>App_rpt-users mailing list
>App_rpt-users at ohnosec.org
>http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users