[App_rpt-users] ACID CD install boot failure

[Joe Bryant]

No, there are none.

 

From: shawpbx at gmail.com [mailto:shawpbx at gmail.com] On Behalf Of David KE6UPI
Sent: Saturday, August 13, 2011 10:36 PM
To: jbryant at bellsouth.net
Subject: Re: [App_rpt-users] ACID CD install boot failure

 

Do you have any pci cards installed? 

David

On Sat, Aug 13, 2011 at 9:55 AM, Joe Bryant <jbryant at bellsouth.net> wrote:

All,

I have a 2002 vintage, VIA EPIA Mini-ITX box (C3 Eden 800Mhz processor). It
has 512 MB RAM, and a 60Gig hard drive. The ACID / CentOS install CD, will
not complete the boot process, it goes into a loop. At the point shown in
this picture:  http://www.qsl.net/k4bry/mini-itx_boot-fail.jpg , the screen
goes dark, and the box reboots into the CD again. The CD is good, it was
used on my first install with no problems.

 

I have manipulated the BIOS settings for several hours, with no change in
the result. It may be caused by a lack of enough RAM, but I Don't know. If
there is documentation on the minimum requirements for an ACID install, I
can't find it.  If I try to find RAM to take it to the 1 Gig maximum, it is
likely to cost more than this old Motherboard is worth.

 

After no progress with this, to see if it was hardware failure, I installed
the Kubuntu-10.04-Alternate-i386 version of Ubuntu, GUI and all, without a
hitch. It runs very slowy, which is to be expected, but it does run. 

 

Does anyone see an obvious problem, or have any idea what I should try next?
I have a second box with the same Motherboard, It would be nice and cheap,
if I could get them both working. 

 

Thanks for any help.

 

Joe Bryant

K4BRY

 

 


_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20110814/cd599a87/attachment.html>