[App_rpt-users] Beagleboard/Lox

[Neal Garbenis]

Thanks Jim the frog command is great :) 

Neal
Sent from my iPhone

On Aug 21, 2011, at 2:32 PM, Jim Duuuude <telesistant at hotmail.com> wrote:

> chan_beagle follows the so-far consistent device specification
> methodology (Asterisk CLI command) of <device-type> active <device-name> 
> 
> for chan_beagle, and your chan_beagle device named 'beagle1234'
> it would be:
> 
> beagle active beagle1234
> 
> for chan_simpleusb, and your chan_simpleusb device named 'fred42'
> it would be:
> 
> susb active fred42
> 
> for chan_usbradio, and your chan_usbradio device name 'usb5678'
> it would be:
> 
> radio active usb5678
> 
> [since chan_usbradio did this first, I think you can see the reasoning
> by which the particular syntax was chosen :-) ]
> 
> Also, you can do <device-type> active
> (with no device specified) to see which is currently "active" (selected).
> 
> JIM WB6NIL
> 
> 
> > From: njgarbenis at gmail.com
> > Date: Sun, 21 Aug 2011 14:27:21 -0400
> > To: app_rpt-users at ohnosec.org
> > Subject: [App_rpt-users] Beagleboard/Lox
> > 
> > I have a beagle board setup with the Lox board using both ports. When I use beagle tune to adjust audio it only works with port a. How change this to adjust port/node b
> > 
> > Neal
> > 
> > Sent from my iPhone
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at ohnosec.org
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users