[App_rpt-users] Two remote nodes used to link two repeaters

[Howard Small]

Ron

Are you trying to set up two repeaters that are linked so that the input
from one is transmitted by both? If so, I am also very interested in how it
is done as it is something we are proposing in our area.

Howard
VK4BS

-----Original Message-----
From: app_rpt-users-bounces at ohnosec.org
[mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Ron Morell
Sent: Wednesday, 7 December 2011 01:01
To: app_rpt-users at ohnosec.org
Subject: [App_rpt-users] Two remote nodes used to link two repeaters

Hello,
I'm new to Asterisk+app_rpt.  Will this application connect two transceivers
(remote nodes) using VoIP so that each transceiver node will transmit what
it receives over the VoIP input from the RF receiving transceiver node?  If
it will, I'd appreciate some discussion as to how to setup this type of
connection or direction to directions, if already written. 

I've been back reading the archives and have read most of this year's
discussions.  Lots of good info on this reflector.

Thanks for your consideration. 
Ron Morell
KA7U