[App_rpt-users] No Red transmit Light

[Monty]

Have you tried to send *7?  You should get link telemetry with PTT.  Also
what is your CTCSSFROM set to in usbradio.conf?  You could set it to no
since it is hooked up to the arcom.

Monty


On Tue, Dec 13, 2011 at 11:28 AM, Fran <baldwin88 at yahoo.com> wrote:

> I am a repeater owner runnning a kenwood  tkr820 and Arcom rc210
> controller on port 1. I recently loaded ACID (AllStar) onto a pc via an
> install disk, everything went well, Node assigned, I also purchased a URI
> (USB interface from DMK Engineering) the URI has a blinking green light but
> when I try to transmit out the red light doesnt light, I modified the
> usbradio.conf file to carrierfrom=usbinvert also.  I have the AllStar
> server connected via a ready made cable from URI cables which goes to a DB
> 9 into my controller on port 2, (port 2 configured as non repeat and ports
> 1 and 2 linked) I also have pinged out to google, seems I am receiving but
> not transmitting. Thanks Frank!!!
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20111213/6bb7343d/attachment.html>