[App_rpt-users] Allstar RTCM (Radio Thin Client Module) is nowavailable

[Marshall Oldham]

Jim, 
 
Okay so one server running Allstar node software at a central location (like my house) can support a dozen RTCM's being used as
"Generic" conventional 
full duplex (repeaters) radio interfaces on far away hilltops even if I do not want to use the RTCM GPS-Timing Multi receiver voting
or Simulcast Transmitter features?
As long as I have some sort of internet connection at the remote sites back to my house?
 
If I understand this correctly this would mean that:
 
1) No cost of computer at the radio site.
2) No worry about the node computer locking up at the remote radio site and having to reboot or reset it.
3) No cost other than the RTCM (Radio Thin Client Module) to setup an Allstar node at the remote radio site. (no computer, no URI,
no Sound FOB) 
4) If I use the RTCM (Radio Thin Client Module) I have the ability to setup a normal Allstar node at the present time and then later
if I want to I can upgrade the hilltop 
for GPS-Timing Multi receiver voting and Simulcast Transmitter by simply adding a GPS receiver at the site and reconfiguring the
software.
 
If so, this seems like a pretty cool little piece of hardware! 
 
Marshall - ke6pcv    
 
 
  


  _____  

From: Jim Duuuude [mailto:telesistant at hotmail.com] 
Sent: Wednesday, December 21, 2011 11:52 AM
To: Marshall Oldham; app_rpt mailing list
Subject: RE: [App_rpt-users] Allstar RTCM (Radio Thin Client Module) is nowavailable


Yeah, that's the general idea. The location of the Linux server running app_rpt/Asterisk can be
more or less anywhere within Internet connectivity of all of the receiver and/or transmitter sites.
Of course, "Internet" can mean either some sort of public Internet connection, or a privately-provided
Internet connection (low-cost microwave link(s), etc).

The only limitation is that an RTCM/Voter module *must* be located on the same LAN as the Linux
server, to at least provide a GPS-based timing reference. A system could be set up with a server
located in some sort of datacenter "on the ground", and all the radios could have an RTCM "on the
hill" with them, and as long as there is Internet connectivity of some sort between each of them
and the server, the system will work nicely. That is providing that there is an RTCM located at
the server location also (whether or not that particular RTCM has radio hardware connected to it
or not).

One minimal Linux server can easily support 1 or 2 dozen RTCM's (on 1 or 2 allstar nodes),
and a larger server could easily support MANY dozens of them on dozens of allstar nodes.
Of course, you REALLY dont want to put too many of them on a single server, being a potential
single point of failure. For pretty much any practical purpose, the reasonable limitation is
the point of failure/redundancy issue, not technical limitations.

I'm not sure if you were clear on this, so I thought I would mention that the RTCM is not just
usable as a GPS-timing-based Multi-Receiver Voting system and/or a Simulcast Transmitter system.
It can also be used as a "generic" radio interface for a conventional (non-GPS-based) either simplex
or full duplex (repeater) radio. The advantage of doing this would be to not have the Linux
host "on the hill" with the radio (as mentioned above). In addition, the RTCM allows for 
portable/mobile operation with a mobile/portable Internet connection in both the GPS-based
and non-GPS-based environments. 

JIM WB6NIL



  _____  

From: ke6pcv at cal-net.org
To: app_rpt-users at ohnosec.org
Date: Wed, 21 Dec 2011 10:54:18 -0800
Subject: Re: [App_rpt-users] Allstar RTCM (Radio Thin Client Module) is nowavailable


I have been looking at the Allstar RTCM (Radio Thin Client Module) and it really looks like a GREAT product and addition to the
already cool Allstar hardware. 
 
Among all the other cool features of the RTCM (Radio Thin Client Module) like Transmitter Simulcasting and Receiver Voting, if I
understand the documentation 
correctly you can use this very small Radio Thin Client Module at a remote radio site to set up an Allstar repeater node if the site
has internet connection without a COMPUTER at the site?
 
Then you can point the node on the hilltop back to a server on the ground somewhere that is easy to get too? 
 
How many total sites can you use Radio Thin Client Modules on and point back to a single server on the ground?  
 
If this is the case, All I can say is WOW, how cool!
 
73
 
Marshall 
 
 
 


  _____  

From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Mark Guibord
Sent: Sunday, December 18, 2011 11:03 AM
To: app_rpt-users at ohnosec.org
Subject: [App_rpt-users] Allstar RTCM (Radio Thin Client Module) is nowavailable


Allstar RTCM Radio Thin-Client Module, an Open-Source VOIP-Based Voting Multi-Receiver and Simulcast Transmit System is now
available for purchase. 
 
For more information visit http://micro-node.com/thin-m1.html 
 
Regards,
Mark Guibord
Micro-Node International

 

 


_______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20111221/abb0de71/attachment.html>