[App_rpt-users] CTCSS Drop Out Time

[Jim W7RY]

Well perhaps we can get a suggestion from one of the Gurus on how to do it. We'll standby and wait for an answer...

Thanks all!
73
Jim W7RY



From: Lu Vencl 
Sent: Saturday, December 24, 2011 8:39 PM
To: 'Jim W7RY' 
Cc: 'John Boteler' 
Subject: RE: [App_rpt-users] CTCSS Drop Out Time


I think that is correct, but I there is more to the effort that needs to happen and that is the part I don't understand..  You have to install it some way.

 

From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Jim W7RY
Sent: Saturday, December 24, 2011 11:34 PM
To: Ken; 'Jim Duuuude'; 'app_rpt mailing list'
Subject: Re: [App_rpt-users] CTCSS Drop Out Time

 

It seems to be here:  /usr/src/astsrc/asterisk/channels/xpmr

 

And the line is: #define TOC_NOTONE_TIME             900                // ms

 

I changed it from 600 to 900. 

 

Did not change a thing... Did I change the right thing?

 

 

 

From: Ken 

Sent: Saturday, December 24, 2011 6:01 PM

To: 'Jim Duuuude' ; w7ry at centurytel.net ; 'app_rpt mailing list' 

Subject: RE: [App_rpt-users] CTCSS Drop Out Time

 

Notone AKA chicken burst gives you carrier with no tone at the end.

But some radios are too slow in closing the CTCSS and still make noise.

There was a posting on here a while back that pointed the time delay in: 

 

/usr/src/asterisk/asterisk/channels/xpmr/xpmr.h

 

The default is 600 ms.  Some radios might be slower than this.

You could change (increase) it, then  make / make install and restart asterisk.

 

My Alinco DR-?35 series seem to want to give you a small squelch tail no matter what you do, however.

 

73

 

Ken

 

 

From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Jim Duuuude
Sent: Saturday, December 24, 2011 6:17 PM
To: w7ry at centurytel.net; app_rpt mailing list
Subject: Re: [App_rpt-users] CTCSS Drop Out Time

 

try

txtoctype = notone

in usbradio.conf

JIM WB6NIL


--------------------------------------------------------------------------------

From: w7ry at centurytel.net
To: app_rpt-users at ohnosec.org
Date: Sat, 24 Dec 2011 13:55:51 -0800
Subject: [App_rpt-users] CTCSS Drop Out Time

Anyone know if there is an adjustment of the time the transmitter stays keyed, and the PL tone drops out and where that setting is?

With my rigs, I still here the squelch crash after the repeater drops out. I would like to cut the PL off a little sooner or delay the transmitter a little longer.

 

BTW, I'm all up and running with the repeater function and the node!  Thanks to all that helped me get past the learning curve!

 

Thanks!

Merry Christmas

73 Jim W7RY

 

 


_______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.1901 / Virus Database: 2109/4700 - Release Date: 12/24/11

No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.1901 / Virus Database: 2109/4701 - Release Date: 12/24/11
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20111224/fbd3fa26/attachment.html>