[App_rpt-users] on board audio

[Jim Duuuude]

I will say this once. Nicely.

THE DISCUSSION ABOUT ONBOARD AUDIO IS NOW *OVER*.

We have good reasons for doing this. Its not changing.
Its not open for discussion.

Thank you.

JIM WB6NIL

> Date: Mon, 26 Dec 2011 11:29:40 -0500
> From: wa4zlw at backwoodswireless.net
> To: app_rpt-users at ohnosec.org
> Subject: Re: [App_rpt-users] on board audio
> 
> On 12/26/2011 11:21 AM, David KE6UPI wrote:
> > I like great audio quality that's way I stopped using Echolink (with a 
> > sound card) and went with Allstar. I have Echolink enabled on my 
> > Allstar but dislike must Echolink connection because of the poor audio 
> > quality and I will disconnect them quickly. I have also disconnected 
> > Allstar (nodes and web transceiver) with poor audio. So I think 
> > Allstar should have some kind of audio quality polices and standards.
> >
> >
> > ulaw at what 64kb/s v GSM 13kb/s over DSL or higher. Most internet is 
> > unlimited anymore at high speeds unless your using a cell carrier. 
> > Does anyone use QOS on there router?
> >
> > Anyways Audio Quality is always better.
> >
> > David
> I always strived for good audio on my repeaters. But QOS does not work 
> over the internet, only MPLS circuits. If you are going over the 
> internet then you have to take what you get. (And I work in this field I 
> now work for Windstream, ex-PAETEC in managed services)
> 
> Leon Wa4ZLW
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20111226/a42c4f41/attachment.html>