[App_rpt-users] app-rpt with external repeater controller possible?

[Tim Sawyer]

This board is for when your controller has only one port or no free ports. If you have a free port, app_rpt works perfectly fine with your existing controller. Just set duplex=0 and linktolink=yes.
---
TIS


On Feb 3, 2011, at 8:15 AM, Jim Duuuude wrote:

Not necessarily. We have a simple board (user-buildable project) that does that very nicely. 
I you have a standalone repater already hooked up to a controller this board can be put
in-between them and it makes it into a very nice adjunct.

JIM WB6NIL

Date: Thu, 3 Feb 2011 11:09:34 -0500
From: kc2wdz at gmail.com
To: app_rpt-users at ohnosec.org
Subject: [App_rpt-users] app-rpt with external repeater controller possible?

Is it possible to use a repeaters external controller and just use app-rpt for it's linking capabilities?
I'm guessing there would be no way of avoiding the repeater id's and messages being sent out to any linked repeater nodes.

_______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20110204/eec9e0fa/attachment.html>