[App_rpt-users] Squelch Tail

[Tim Sawyer]

See if this helps...

http://209.159.155.200/drupal/node/170
--
Tim
:wq

On Feb 4, 2011, at 8:53 AM, Bobby Lacey wrote:

> Hi,
> 
> I am a newcomer to Allstar and have just set up my node this week. I had a few wrinkles that I was able to iron out in time by reading the archives, but I haven't been able to fix the following problem.
> 
> My node has a squelch tail that won't go away and seems to cycle constantly once it gets going. I'm using a URI to a Kenwood TM-D700a and my node is in simplex mode. I still think I may have bugs in my tuning area. My config is pasted below and I would love any help that anyone could provide. Thanks & 73.
> 
> Bobby KF4GTA
> 
> ## rpt.conf ##
> 
> 
> [27633]                                 ; Change this to your assigned node number
> 
> rxchannel=Radio/usb27633
> duplex=0
> erxgain=-3
> etxgain=3
> ;controlstates=controlstates
> scheduler=schedule27633
> morse=morse27633
> macro=macro27633
> functions=functions27633
> phone_functions=functions27633
> link_functions=functions27633
> telemetry=telemetry
> wait_times=wait-times
> context =  radio
> callerid = "Repeater" <0000000000>
> idrecording = |iKF4GTA
> accountcode=RADIO
> hangtime=100
> althangtime=100
> totime=170000
> idtime=540000
> politeid=3000
> 
> idtalkover=|iKF4GTA
> unlinkedct=ct2
> remotect=ct3
> linkunkeyct=ct8
> ;nolocallinkct=0
> ;eannmode=1
> ;connpgm=yourconnectprogram
> ;discpgm=yourdisconnectprogram
> ;lnkactenable=0
> ;lnkacttime=1800
> ;lnkactmacro=*52
> ;lnkacttimerwarn=30seconds
> ;remote_inact_timeout=1800
> ;remote_timeout=3600
> nounkeyct=0
> ;holdofftelem=0
> beaconing=0
> 
> 
> ## usbradio.conf ##
> 
> [general]
> 
> [usb27633]
> 
> hdwtype=0
> rxboost=0
> txboost=1
> rxctcssrelax=1
> txctcssdefault=100.0
> rxctcssfreqs=100.0
> txctcssfreqs=100.0
> ;rxctcssoverride=0
> carrierfrom=usb
> ctcssfrom=usb
> rxdemod=speaker
> txprelim=yes
> txlimonly=no
> txtoctype=notone
> txmixa=composite
> txmixb=no
> invertptt=0
> duplex=0
> rxondelay=0
> rxnoisefiltype=0
> eeprom=0
> 
> #includeifexists custom/usbradio.conf
> 
> 
> 
> ## usbradio_tune_usb27633.conf ##
> 
> [usb27633]
> ; name=usb27633
> ; devicenum=0
> devstr=3-1
> rxmixerset=1000
> txmixaset=200
> txmixbset=500
> rxvoiceadj=0.149018
> rxctcssadj=0.500000
> txctcssadj=200
> rxsquelchadj=1
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users