[App_rpt-users] Remote access to node fails

[Stephen Rodgers]

On 02/13/2011 04:03 PM, GARY BONEBRAKE wrote:
> New node setup using Allstarlink portal download. 
> 
> Behind NAT on private network. 
> 
> All necessary ports (udp/tcp) forwarded to server IP (4569, 5004-5082,
> 10000-20000)
> 
> DNS redirect  available (w5bi.no-ip.org).
> 
>  
> 
> 1st problem - AllstarLink Web Transceiver on separate PC on LAN will not
> connect to my node (works to other nodes)

	Hints--

	Router issue: Port 4569/udp needs to be forwarded to the internal IP of the allstar box.
	Recheck your router settings.
	Network setup: Is the router on the same ethernet segment and network? Can the router be pinged from the node?
	Registration: Is the box registering? Log in to allstarlink.org and display the node list.
	There should be a green box next to your node number.
> 
>  
> 
> 2nd problem - iaxRpt works on LAN but not from outside. Am I trying
> something impossible? Pointing to my public IP or w5bi.no-ip.org does not
> work.

	Use the same hints listed above.


> 
>  
> 
> 3rd problem - WinSCP works fine on LAN but not from outside. Same question
> as iaxRpt - possible?

If install was ACID, ssh will need port 222/tcp forwarded to the internal ip of the node to work.
Otherwise, port 22/tcp should be forwarded if it was a non-acid or non-limey distro.

> 
>  
> 
> I probably left out some critical detail(s), but help point me in the right
> direction.
> 
>  
> 
> Gary
> 
>  
> 
> Gary Bonebrake W5BI
> 
> Emergency Coordinator
> 
> Sandoval County ARES
> 
>  <mailto:w5bi at arrl.net> w5bi at nmscares.org
> 
>  
> 
> 
> 
> 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users