[App_rpt-users] Beagleboard and USB URI dongle

[Steve Gladden]

Also Jim, THANK YOU! for creating this interface type..
There are many cases where I'd prefer NOT to do DSP on the PC /Board puter.

Especially when using older/smaller stuff.

Such as a WRT54GL


-Steve




>
> chan_simpleusb is basically a 'gutted' version of chan_usbradio. It has no
> DSP functionality whatsoever.
> It is designed for radios that provide COR and/or CTCSS detection signals,
> and will run FAR more efficiently
> allowing for use on MUCH slower CPUs.
>
> JIM WB6NIL
>
> From: yokshs at sbcglobal.net
> To: app_rpt-users at ohnosec.org
> Date: Tue, 15 Feb 2011 09:05:51 -0600
> Subject: [App_rpt-users] Beagleboard and USB URI dongle
>
>
>
>
>
>
>
>
>
>
> I'm curious about chan_simpleusb. Can it be used on a slower PC to improve
> performance?
>
> I'm running 2 CM108 fobs here on a P3/866 MHz with 512MB ram. This was my
> old EchoIRLP node PC, and it seems to
> work ok for Allstar, but I realize that it's below the recommended CPU
> speed for a USB fob node.
>
> My node radios have PL encode/decode in hardware, etc, so would I lose any
> functionality by switching to chan_simpleusb?
>
> Thanks.73
>
> Kyle
> K0KN
> --- Original Message ---Yes, it works quite beautifuly with the URI, in
> fact it will support 2 of them
> *BUT* only with chan_simpleusb. The CPU does not have the horsepower
> to do the DSP routines used in chan_usbradio.
>
> Why dont you wait for the LOX board to become available in production?
> It wont be long.
>
> JIM WB6NIL
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> --
> This message has been scanned for viruses and
> dangerous content by MailScanner, and is
> believed to be clean.
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>


Michigan Broadband Systems Inc.
"Always Connected"

(734)527-7150

Steve's cellphone: (734)904-1811


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.