[App_rpt-users] Echolink announcements.
Jim Duuuude
telesistant at hotmail.com
Mon Jan 17 16:43:28 UTC 2011
i see your point. Perhaps my documentation error was a Freudian slip.. Or was that what Sigmund Freud's wife wore under
her skirt? :-).
Anyway, I think I'll take the "change the design to match the documentation" option...
JIM
Date: Mon, 17 Jan 2011 11:33:13 -0500
From: jrorke at cogeco.ca
To: app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] Echolink announcements.
Well, I dont have any Echolink on any of my nodes and I would like
to disable all echolink connect and disconnect messages (on my end)
that may come through when a node that does have echolink is
connected. to mine.
I'm not anti Echolink, but I find that people on echolink tend to
connect to nodes, monitor for 1 nano second, and if they don't hear
anything disconnect. What happens on the other end (my end) is 5
minutes of connect message and then 5 minutes of disconnect
messages!
So my vote is to make it work as described, that way it will be up
to the node owner to customize as required.
Jon
On 1/17/2011 11:17 AM, Jim Duuuude wrote:
excellent point. Well, should I change the documentation to match
the design, or change
the design to match the documentation?
JIM
From: kb2ear at kb2ear.net
To: telesistant at hotmail.com; kb4fxc at inttek.net
CC: app_rpt-users at ohnosec.org
Subject: RE: [App_rpt-users] Echolink announcements.
Date: Mon, 17 Jan 2011 11:08:33 -0500
http://ohnosec.org/drupal/node/107
eannmode
0 = do not
announce Echolink nodes at all, 1 = announce only
the node number (Allstar-translated), 2 = announce
only the call of the echolink station, 3 = announce
both
1
echolinkdefault
0 = telemetry
output off, 1 = telemetry output on, 2 = timed
telemetry output on command execution and for a
short time thereafter, 3 = follow local telemetry
mode
2
Thanks & 73,
Scott KB2EAR
From: Jim Duuuude
[mailto:telesistant at hotmail.com]
Sent: Monday, January 17, 2011 12:42 AM
To: kb2ear at kb2ear.net; kb4fxc at inttek.net
Cc: app_rpt mailing list
Subject: RE: [App_rpt-users] Echolink
announcements.
Frankly,
I wasnt aware that you were supposed to be able to turn them
off completely.
Where did you get the idea that it does this??
JIM
From:
kb2ear at kb2ear.net
To: telesistant at hotmail.com; kb4fxc at inttek.net
CC: app_rpt-users at ohnosec.org
Subject: RE: [App_rpt-users] Echolink announcements.
Date: Sun, 16 Jan 2011 23:45:12 -0500
I just installed it here. I now have callsigns
again, but still can’t turn of the announcements all
together.
Thanks & 73,
Scott KB2EAR
From: Jim Duuuude
[mailto:telesistant at hotmail.com]
Sent: Sunday, January 16, 2011 7:37 PM
To: kb4fxc at inttek.net; kb2ear at kb2ear.net
Cc: app_rpt mailing list
Subject: RE: [App_rpt-users] Echolink
announcements.
Yep, there was a
problem introduced a while ago. Im surprised no one found
it until now.
The fixed version (app_rpt version 0.280) will be
available from SVN after 17:15 PST today.
Thanks to everyone who helped point this out.
JIM WB6NIL
> Date: Sun, 16 Jan 2011 17:00:24 -0500
> From: kb4fxc at inttek.net
> To: kb2ear at kb2ear.net
> CC: app_rpt-users at ohnosec.org
> Subject: Re: [App_rpt-users] Echolink announcements.
>
>
> Hi everyone,
>
> I, too, noticed that echolink announcements went away
after upgrading
> recently....After looking through the app_rpt.c code,
I found a "new"
> variable that seems to need to be set, too. In the
node stanza, try this:
>
> eannmode=2
> tannmode=2
>
> ...This worked for me....Anyone know what "tannmode"
is being used for??
>
> 73, David kb4fxc
>
>
> On Sun, 16 Jan 2011, Scott Weis wrote:
>
> > Has anyone else noticed that the eannmode= and
echolinkdefault= no longer
> > work? I have eannmode=0 and echolinkdefault=0
and still get echolink
> > announcements. Also when eannmode=2 or 3 I do
not get callsigns anymore.
> >
> > Thanks & 73,
> > Scott KB2EAR
> >
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at ohnosec.org
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20110117/5de78d05/attachment.html>
More information about the App_rpt-users
mailing list