[App_rpt-users] Problem with app_rpt configuration and URI's audio interface

Jim Duuuude telesistant at hotmail.com
Sat Jan 22 22:23:07 UTC 2011


Well, the first question is:

Where does the audio come from in the receiver?? Does it come directly from the
discriminator (without any de-emphasis or filtering), or is it line-level or speaker
(de-emphasised) audio?

JIM

Date: Sat, 22 Jan 2011 20:00:39 +0200
From: akalexandrov at gmail.com
To: app_rpt-users at ohnosec.org
Subject: [App_rpt-users] Problem with app_rpt configuration and URI's audio	interface

Dear colleagues,

I built a node configuration with ACID system and URI from DMKEngineering.

After the import of the  ACID/Asterisk/app_rpt  configuration from Allstarlink.org I connected the URI to my reg and install IAX client to the PC.



The system work well from IAX  clent through URI to the reg - when I
 send audio or voice from IAX  client to the reg through URI the reg 
transmit the audio very well and clear.
The problem is that I can not
 send any audio signal from the REG to the IAX client. Practically the 
audio from the REG go to the MIC_AC pin of URI and after that dropped 
down.

Practically I have only one way audio communication:  Iax client ->Asterisk-> app_rpt -> URI -> reg


Probably I use a wrong usbradio.conf configuration but have not idea where to start looking for the problem.

 I red in the
 mailing list content some similar cases and advices about  URI MIC 
interface problems and tried to use them but unfortunately  without 
success.


I will be very grateful for any advice how to resolve the problem.  

73!

Alex
LZ1AZA


The configuration I use is the following:
URI hardware interface:
audio line output of the reg  - to URI MIC_AC (pin 21)


microphone input of the REG - to  LEFT_AC(pin 22)
PTT - to PTT pin of the URI (pin1)

the URI's usbradio.conf file look like this:
;
; Usbradio channel driver Configuration File
;

[general]



[usb27371]

hdwtype=0    
rxboost=1
txboost=1
rxctcssrelax=1
txctcssdefault=100.0
rxctcssfreqs=100.0
txctcssfreqs=100.0
;rxctcssoverride=0
carrierfrom=dsp
ctcssfrom=dsp
rxdemod=flat


txprelim=yes
txlimonly=no
txtoctype=notone
txmixa=composite
txmixb=no
invertptt=0
duplex=1
rxondelay=0
rxnoisefiltype=0
eeprom=0

#includeifexists custom/usbradio.conf



_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20110122/4d8ec1b8/attachment.html>


More information about the App_rpt-users mailing list