[App_rpt-users] aprs password for app_gps

[Ken]

Well - Google found this

 

http://zielkeassociates.com/~jack/aprs-xo/aprspass/

 

I took the first link provided and looked at the first few entries and there
are emails for sysops who will give you a "passcode"

Apparently the passcode is generated from an algorithm using your call+SSID
as input. 

I have not tried it (yet)

 

Ken

 

 

From: app_rpt-users-bounces at ohnosec.org
[mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Chuck Henderson
Sent: Sunday, January 23, 2011 5:53 AM
To: app_rpt mailing list
Subject: [App_rpt-users] aprs password for app_gps

 

I would like to set up my allstarlink system to report position information
to the aprs system. 

 

Can someone tell me how to set up this password?  Also, are the default
server and port listed in the example below what should be used?  

I have searched the aprs site and couldn't find who to request this
information from.

 

Chuck Henderson,  WB9UUS

 

 

 
 
; Configuration for app_gps
;
[general]
 
call = wb9uus-2   ; callsign (including SSID) for APRS purposes
password = 12345 ; Password for APRS-IS server for above callsign
comment = AllStar Node 27468 ; Text to be displayed associated with this
station
server = second.aprs.net  ; APRS-IS server to report information to
port = 10151 ; port on server to send data
icon = r  ; A CAR (default)   Icon do be displayed for station on APRS
display (see below)
comport = /dev/ttyS0  ; Serial port for GPS receiver (specify this only if
using GPS receiver)
baudrate = 4800  ; Baud rate for GPS receiver (specify this only if using
GPS receiver)
;debug = y ; set this for debug output
freq=442.700  ; Display Frequency of station
tone=107.2    ; CTCSS tone of station (0.0 for none)
lat=40.508    ; Fixed (default) latitude in decimal degrees
lon=-88.988   ; Fixed (default) longitude in decimal degrees
elev=123.4    ; Elevation of Antenna in Meters (*NOT* HAAT)
power=9       ; Power level (see below)
height=5      ; Antenna Height in HAAT (see below)
gain=8        ; Antenna Gain (see below)
dir=0         ; Antenna Direction (see below)

On Sat, Jan 22, 2011 at 10:30 PM, Jim Duuuude <telesistant at hotmail.com>
wrote:

There have (obviously) been some changes/improvements made to the
Echolink and APRS/GPS subsystems within app_rpt.

Included in these is the ability for a node to report its "fixed" GPS
coordinates
to the APRS network, even if it does not have a GPS receiver connected.

Please see the following:

Setting up Echolink Connectivity
http://209.159.155.200/drupal/node/56

Setting Up APRS and GPS Configuration
http://209.159.155.200/drupal/node/179

Of course, the latest copies of app_gps and chan_echolink need to be
downloaded from the SVN.

JIM WB6NIL



 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20110123/9f79ae16/attachment.html>