[App_rpt-users] My first node attempt today

[Scott Weis]

"radio active usbxxxxx" where xxxxx is your node number.

"radio set debug"

 

Should you everything about the RF side, COR detect, CTCSS detect, TX PTT,
etc.

 

From: app_rpt-users-bounces at ohnosec.org
[mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Lu Vencl
Sent: Friday, July 22, 2011 9:49 AM
To: 'David KE6UPI'
Cc: app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] My first node attempt today

 

Hi David,

This is long fixed now.. Had an error in the USB.conf file, but what I was
looking for was some sort of feedback showing DTMF detection, for which I
now know I can see from CLI and perhaps a greater verbose value (I use 9)

What would be nice though is COR status, for which I don't think there is
any visual available that I know of.. But then again, I am using DSP now so
it really does not matter.

73, 

Lu  KA4EPS

 

 

From: shawpbx at gmail.com [mailto:shawpbx at gmail.com] On Behalf Of David KE6UPI
Sent: Friday, July 22, 2011 9:28 AM
To: Lu Vencl
Cc: app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] My first node attempt today

 

Hey Lu, What command are you trying to use? I don't remember a command to
show CTCSS or DTMF. I guess the questions is what are you trying to do?

David

On Sat, Jul 9, 2011 at 7:21 AM, Lu Vencl <vencl at att.net> wrote:

Folks,

Got the first one up, but I can't seem to get any command to work (unless I
use CLI).

Is there a script or method where I can get visual screen stats that shows
CTCCS, DTMF decode etc?  Similar to IRLP's read input?

Thanks

Lu

KA4EPS


_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20110722/ed60ff56/attachment.html>