[App_rpt-users] My first node attempt today

[Steve Gladden]

Nice!


From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Scott Weis
Sent: Friday, July 22, 2011 9:57 AM
To: 'Lu Vencl'; 'David KE6UPI'
Cc: app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] My first node attempt today

"radio active usbxxxxx" where xxxxx is your node number.
"radio set debug"

Should you everything about the RF side, COR detect, CTCSS detect, TX PTT, etc.

From: app_rpt-users-bounces at ohnosec.org<mailto:app_rpt-users-bounces at ohnosec.org> [mailto:app_rpt-users-bounces at ohnosec.org]<mailto:[mailto:app_rpt-users-bounces at ohnosec.org]> On Behalf Of Lu Vencl
Sent: Friday, July 22, 2011 9:49 AM
To: 'David KE6UPI'
Cc: app_rpt-users at ohnosec.org<mailto:app_rpt-users at ohnosec.org>
Subject: Re: [App_rpt-users] My first node attempt today

Hi David,
This is long fixed now.. Had an error in the USB.conf file, but what I was looking for was some sort of feedback showing DTMF detection, for which I now know I can see from CLI and perhaps a greater verbose value (I use 9)
What would be nice though is COR status, for which I don't think there is any visual available that I know of.. But then again, I am using DSP now so it really does not matter.
73,
Lu  KA4EPS


From: shawpbx at gmail.com<mailto:shawpbx at gmail.com> [mailto:shawpbx at gmail.com]<mailto:[mailto:shawpbx at gmail.com]> On Behalf Of David KE6UPI
Sent: Friday, July 22, 2011 9:28 AM
To: Lu Vencl
Cc: app_rpt-users at ohnosec.org<mailto:app_rpt-users at ohnosec.org>
Subject: Re: [App_rpt-users] My first node attempt today

Hey Lu, What command are you trying to use? I don't remember a command to show CTCSS or DTMF. I guess the questions is what are you trying to do?

David
On Sat, Jul 9, 2011 at 7:21 AM, Lu Vencl <vencl at att.net<mailto:vencl at att.net>> wrote:
Folks,
Got the first one up, but I can't seem to get any command to work (unless I use CLI).
Is there a script or method where I can get visual screen stats that shows CTCCS, DTMF decode etc?  Similar to IRLP's read input?
Thanks
Lu
KA4EPS

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org<mailto:App_rpt-users at ohnosec.org>
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20110722/dba87264/attachment.html>