[App_rpt-users] Remote commands

[Lu Vencl]

Neal, I think you have a typo below.. Should it not be *4XXXXXX?

That is what I have to do to get the remote command back.. Once I have control, I tried *3xxxxx to connect a node , or even *81 to force time announce, but neither work.

So I presume there is a permissions issue or something else I am doing wrong?

 

From: Neal Garbenis [mailto:njgarbenis at gmail.com] 
Sent: Wednesday, July 27, 2011 9:08 PM
To: Lu Vencl
Cc: <app_rpt-users at ohnosec.org>
Subject: Re: [App_rpt-users] Remote commands

 

Lu

 

I am no expert but I do use the remote command often. First you need to be connected to the node that you want to control. Then dial *xxxxxx (the node you want to control).  You will then hear a very overdriven audio file that says remote command.   From that point on you are controlling that node you can (connect,disconnect, etc). To exit remote comand mode hit the # sign. 

 

Hope this helps

Neal

NG8Y


Sent from my iPhone


On Jul 27, 2011, at 8:52 PM, "Lu Vencl" <vencl at att.net> wrote:

Ok, 

I know this is a newbie question, but I searched everywhere I know and I can’t find an example nor figure this out..

I need to understand the proper command structure or procedure of *4 remote command.

Example, I want to issue a command to one of my nodes from another node. How do I do this?

 

I tried the following example from my node 27870

KA4EPS-R-Margate*CLI> rpt fun 27870 *427869*81#

 

I thought that this command would allow me to announce the time on node 27869 while entering this on the 27870 node..

Is this not possible?

 

Another example, let’s say I want 27869 to connect to 27875 would I want to dial over the air on (node 27870)  *427869*327875#  ?

Thanks again for your help.. I am just not getting anywhere with it.

Lu, KA4EPS

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20110727/86d26639/attachment.html>