[App_rpt-users] Node access from SIP device question.

[Michael Carey]

I thought I should answer my own question here.

I've done some Google research on using SIP devices behind a NAT router 
and found some specific info on the SPA-2000.
Long story short, a firmware upgrade and some tweaks to some settings in 
the SPA-2000... it seems to work very nicely now.

Fantastic fun indeed!

Michael.
VK5ZEA

On 25/07/2011 20:59, Michael Carey wrote:
> Hi Everybody,
>
> I have been playing around some more with my new AllStar node today.  
> I dug an old Sipura SPA-2000 out of the junk box and set it up to 
> connect to the SIP Telephone Portal.  This device is connecting to the 
> internet through a separate ADSL connection to my AllStar node.
>
> After resetting the SPA-2000 to default and programming it 
> accordingly... it seems to work... but only once!
>
> When it is first powered up I can connect it to my node (27871), enter 
> my PIN and talk to my node OK.
>
> After this initial call is complete, I cannot seem to re-connect. I 
> dial the node number and #... and then after around 15-20 seconds I 
> get a busy signal.
> If I remove and replace power on the SPA-2000, it works perfectly once 
> more... but only once.
>
> Any ideas?
>
> Michael.
> VK5ZEA
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>