[App_rpt-users] URI not found

[George Csahanin]

I had dialed into his box too, and looked at exactly those items, all was 
correct.

Here's what was real odd. Do "radio active, and it spits back usb27891 which 
is correct. Then do radio txvoice and it says that usb27891 is not there, or 
some message to that effect.

VERY odd.

GeorgeC
W2DB
2360

----- Original Message ----- 
From: "Bryan D. Boyle" <bdboyle at bdboyle.com>
To: <app_rpt-users at ohnosec.org>
Sent: Thursday, July 28, 2011 10:08 AM
Subject: Re: [App_rpt-users] URI not found


> On 7/28/11 9:39 AM, Ed Wilhelm wrote:
>> Trying to help a friend get his Asterisk box up and running but having 
>> problems. His DMK Engineering URI is not being found. I can login and do 
>> lsusb and it's there, but asterisk app_rpt never finds it. Solid green 
>> led. I try to command radio active usb<node number>  but when you check 
>> it says device not active.
>> I wish I could try plugging in another URI but he is over 100 miles from 
>> my location.
>>
>> Any ideas or suggestions?
>>
> Check that the line in usbradio_tune_usbxxxxx.conf is pointing to the 
> correct USB port?  If it isn't...well, strange things will happen...under 
> devstr=X-Y where X is the usb bus for that channel, and Y is the specific 
> device the dongle is connected to.  use the command lsusb to see whether 
> it's being detected by the kernel; you'll see:
>
> Bus 002 Device 002: ID 0d8c:013c C-Media Electronics, Inc.
>
> which will tell you where the dongle is...make the devstr= to the 2 
> numbers you see there, dropping the 00.  At least, that's what worked for 
> me...
>
> [usbxxxxx]
> ; name=usbxxxxxx
> ; devicenum=0
> devstr=2-2
> rxmixerset=438
> txmixaset=530
> txmixbset=500
> rxvoiceadj=0.625000
> rxctcssadj=2.436119
> txctcssadj=140
> rxsquelchadj=800
>
> -- 
> Bryan
> In this world, you must be oh so smart or oh so pleasant.
> Well, for years I was smart. I recommend pleasant.
> You may quote me.
>
>
>