[App_rpt-users] Rx disable command

[Tony KT9AC]

Yes, thanks to help from Don, W9DRR I'm doing something similar to switch tail messages/courtesy tones. I have shell scripts that do a "sed" (stream editor) and module reload for the rpt.conf file.

I would be willing to share these for the groups' benefit. Eventually these can be part of the standard build (a tail message/CT/PL select COP command set) if enough of us can help Jim with coding/testing.

My eyes go cross when looking at the 87K lines of app_rpt.c, but I'm trying to understand it all! Anyone have a pseudo-code chart?

There are mentions of Digital Squelch types in usbradio.conf, but I don't think its ever been developed.

Tony

--- On Wed, 6/15/11, Bryan D. Boyle <bdboyle at bdboyle.com> wrote:

> From: Bryan D. Boyle <bdboyle at bdboyle.com>
> Subject: Re: [App_rpt-users] Rx disable command
> To: app_rpt-users at ohnosec.org
> Date: Wednesday, June 15, 2011, 8:54 AM
> On 6/15/11 7:34 AM, Tony KT9AC
> wrote:
> > Too bad you can't just switch the input PL required
> during those times.
> > 
> > 
> 
> write a shell script...that copies two different versions
> of the usbradio.conf file...say, usbradionormal.conf and
> usbradiolid.conf over the running usbradio.conf that has the
> pl codes differently set, maybe, if your users have the
> capability, of doing DPL, changing from audio to the digital
> pl mode...) and sending rasterisk a reload command after
> overwriting to reload the config...???
> 
> the DTMF=cmd,path to command function is pretty powerful.
> 
> I'll give it a try...thinking this would be a quick and
> dirty way of accomplishing it...???
> 
> Thoughts?
> 
> -- Bryan
> In this world, you must be oh so smart or oh so pleasant.
> Well, for years I was smart. I recommend pleasant.
> You may quote me.
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>