[App_rpt-users] Courtesy Tones

[Corey Dean]

I don't think this is what Randy wanted.  We wanted to have a totally different courtesy tones fromm just one remote node on the receive.  Say node 1234 was remote to the local node and other remote nodes were connected in.  He would want 1234 to have a different tone than anything else.

Corey  N3FE

-----Original Message-----
From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Steve Agee
Sent: Sunday, June 26, 2011 1:25 PM
To: Randy Ballard; app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] Courtesy Tones

Sure, just define a different tone such as ct1 or ct2 or ct3 for the other 
node. You can also edit the actual tone values that you want in the rpt.conf 
file. For example, I like to use a dial tone, which reads:

remotetx=|t(350,440,400,3500)

So when the node is linked and a local user unkeys they hear the dial tone, 
which is two tones mixed together at once ...the first two values of the 
line ... 350 Hz and 440 Hz, for 400 milliseconds, at a level of 3500.

N5ZUA

----- Original Message ----- 
From: Randy Ballard
To: app_rpt-users at ohnosec.org
Sent: Sunday, June 26, 2011 11:45 AM
Subject: [App_rpt-users] Courtesy Tones

Hi I was wondering if there is a way to have a different ctone for different 
nodes like node 27365=ct2 and if there is how is id defined

thanks
-- 
Randy
KB3HJC

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

--
This message was scanned and is believed to be clean.
Click here to report this message as spam. 
http://simba.repeater.net/cgi-bin/learn-msg.cgi?id=D1B5722E3.A7644