[App_rpt-users] Beagleboard URI issue: "device usb27674 currently not active"
Jim Duuuude
telesistant at hotmail.com
Sat Mar 5 23:41:15 UTC 2011
Dont run chan_usbradio on Pickle. Dont even have a usbradio.conf file in your directory.
Try "susb active"
and "susb tune." .. etc
JIM
> Date: Sat, 5 Mar 2011 15:37:17 -0800
> From: phil.n6tct at gmail.com
> To: app_rpt-users at ohnosec.org
> Subject: [App_rpt-users] Beagleboard URI issue: "device usb27674 currently not active"
>
> Gang, I would love whatever help your collective brains and experience
> can provide on the following newbie problem.
>
> I recently brought up a generic PC running ACID and a USB URI fob and
> made it all work. Yay! Emboldened by my success :-) I thought I
> would try getting my beagleboard running in a similar configuration
> ... and so far, failed. The URI green LED blinks like it should when
> asterisk starts. But asterisk CLI "radio key" and "radio unkey" don't
> do anything (i.e., they do not turn on or off the URI fob's red LED).
> Attempting to run "radio tune txvoice 500" generates the error "Device
> usb27674 currently not active". (27674, of course, is the node number
> for this system.) Running "radio active usb27674" does not give an
> error but does not change anything (i.e., radio tune still fails with
> the same error message).
>
> I suspect it is just some simple configuration thing I have overlooked
> and would greatly appreciate any thoughts. --Phil, N6TCT
>
> Details:
>
> Beagleboard hardware is a beagleboard-xM, assy rev B, at 1 GHz.
>
> OS is pickle linux: Linux version 2.6.35.4 (root at pickle) (gcc version
> 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #5 PREEMPT Wed Dec 29 04:03:36 UTC
> 2010 ()
>
> URI is a DMK URI; I have two of them and have tried both of them, same
> behavior. Both work fine on my PC system.
>
> Asterisk configuration: I first downloaded files from the allstar link
> network and then modified by hand to use the simpleusb channel. I
> have included my usbradio.conf, simpleusb.conf, and rpt.conf below.
> (Is it true that I actually need both usbradio.conf and
> simpleusb.conf?)
>
> When the system boots it finds the URI:
>
> [ 68.294250] generic-usb 0003:0D8C:013C.0002: input: USB HID v1.00
> Device [C-Media Electronics Inc. USB PnP Sound Device ]
> on usb-ehci-omap.0-2.4/input3
>
> When asterisk starts it logs messages I would expect (esp. since I
> can't tune the radio):
>
> [Mar 5 23:14:00] NOTICE[775] app_rpt.c: Normal Repeater Init 27674
> [Mar 5 23:14:00] NOTICE[793] chan_simpleusb.c: Assigned USB device 1-2.4:1.0 to
> simpleusb channel usb27674
> [Mar 5 23:14:00] WARNING[793] chan_simpleusb.c: File simpleusb_tune_usb27674.co
> nf not found, device usb27674 using default parameters.
>
> As mentioned, radio key and radio unkey do not give errors but neither
> do they do anything on the URI fob. Radio tune gives an error:
>
> peekskill*CLI> radio active
> Active (command) USB Radio device is [usb27674]
> peekskill*CLI> radio key <-- note no error
> peekskill*CLI> radio unkey <-- note no error
> peekskill*CLI> radio tune txvoice 500
> Device usb27674 currently not active
> peekskill*CLI> radio active
> Active (command) USB Radio device is [usb27674]
> peekskill*CLI> radio active usb27674
> Active (command) USB Radio device set to [usb27674]
> peekskill*CLI> radio tune txvoice 500
> Device usb27674 currently not active
>
> The start of my rpt.conf file:
>
> [27674] ; Change this to your assigned
> node number
>
> rxchannel=SimpleUSB/usb27674
> duplex=2
> erxgain=-3
> etxgain=3
> ;controlstates=controlstates
> [...]
>
> My usbradio.conf:
>
> ;
> ; Usbradio channel driver Configuration File
> ;
>
> [general]
>
> [usb27674]
>
> hdwtype=0
> rxboost=1
> txboost=1
> rxctcssrelax=1
> txctcssdefault=100.0
> rxctcssfreqs=100.0
> txctcssfreqs=100.0
> ;rxctcssoverride=0
> carrierfrom=usbinvert
> ctcssfrom=no
> rxdemod=speaker
> txprelim=no
> txlimonly=no
> txtoctype=notone
> txmixa=voice
> txmixb=no
> invertptt=0
> duplex=1
> rxondelay=0
> rxnoisefiltype=0
> eeprom=0
> #includeifexists custom/usbradio.conf
>
> My simpleusb.conf:
>
>
> ;
> ; SimpleUSB configuration
> ;
> [general]
>
> [usb27674]
>
> eeprom=0
>
> hdwtype=0 ; Leave this set to 0 for USB sound fobs modified using
> ; the instructions from usbfob.pdf. Use a setting of
> ; 1 is for Dingotel/Sph interfaces.
>
> rxboost=1 ; 0 = 20db attenuator inserted, 1= 20db attenuator remov
> ed
> ; Set to 1 for additonal gain if using a low-level receiv
> er output
>
> carrierfrom=usbinvert ; no,usb,usbinvert
> ; no - no carrier detection at all
> ; usb - from the COR line on the modified USB sound fob
> ; usbinvert - from the inverted COR line on the modified
> USB sound fob
>
> ctcssfrom=no ; no,usb,usbinvert
> ; no - CTCSS decoding, system will be carrier squelch
> ; usb - CTCSS decoding using input from USB FOB
> ; usbinvert - from the inverted CTCSS line on the modifie
> d USB sound fob
>
> txmixa=voice ; Left channel output: no,voice,tone,composite,auxvoice
> ; no - Do not output anything
> ; voice - output voice only
>
> txmixb=no ; Right channel output: no,voice,tone,composite, auxvoic
> e
> ; See txmixa above.
>
> invertptt=0 ; Invert PTT 0 = ground to transmit, 1 = open to transmi
> t
> ; This is the collector lead of the 2n4401 on the modifie
> d
> ; usb sound fob.
> ; please refer to the howto for the procedure to do this.
> duplex=1 ; Full Duplex
>
> plfilter=yes ; enable PL filter
>
> deemphasis=no ; enable de-emphasis (input from discriminator)
>
> Thanks!
>
> Phil, N6TCT
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20110305/a731eb2c/attachment.html>
More information about the App_rpt-users
mailing list