[App_rpt-users] Transmit tuning with susb tune?

[Phil N6TCT]

Thanks, Jim.  But no, "susb tuna txa" (or txb) does not generate tone
-- that was my question: what should I use to generate tone to get
things calibrated?

Thanks!

Phi, N6TCT

On Sat, Mar 5, 2011 at 5:30 PM, Jim Duuuude <telesistant at hotmail.com> wrote:
> susb tune txa (or txb).. i dont remember whether it generates tone
> susb tune rx for rx
> and dont forget about susb tune rxdisplay
>
>
>
>> Date: Sat, 5 Mar 2011 17:13:53 -0800
>> From: phil.n6tct at gmail.com
>> To: app_rpt-users at ohnosec.org
>> Subject: [App_rpt-users] Transmit tuning with susb tune?
>>
>> Ok, so much progress has been made now that Jim has me using "susb"
>> instead of "radio" commands when using the simpleusb channel. :-) I
>> really like "susb tune rxdisplay" for receive audio level tuning.
>>
>> But: what is the recommend equivalent to"radio tune txvoice <xxx>"
>> command, the one that would generate a 1 kHz tone at a what should be
>> 3 kHz deviation so that I could use a service monitor to adjust the
>> txgain appropriately? susb tune txa and txb just set the levels,
>> they don't actually transmit.
>>
>> Thanks!
>>
>> Phil, N6TCT
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>