[App_rpt-users] Config files for Santiago Board

[KC2WDZ]

I'm trying to figure out how to configure app_rpt to use the Santiago Board
between an existing controller and repeater.

Should duplex=1 in rpt.conf ?

as for usbradio.conf only the following underlined are needed ??

*hdwtype=0
rxboost=1
*txboost=1
*rxctcssrelax=1
*txctcssdefault=100.0
rxctcssfreqs=100.0
txctcssfreqs=100.0
;rxctcssoverride=0
carrierfrom=vox
ctcssfrom=no
rxdemod=speaker
txprelim=no
txlimonly=no
txtoctype=no
*txmixa=composite*
txmixb=no
*invertptt=0
duplex=0
*rxondelay=0
rxnoisefiltype=0
*eeprom=0*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20110329/18cc878a/attachment.html>