[App_rpt-users] ilink 4 issue

[Tim Sawyer]

Yes you have to connect first! Glad you figured that out on your own :-)
--
Tim
:wq

On Nov 3, 2011, at 6:47 PM, Lu Vencl wrote:

> All,
> I think I just figured out that I might have been the problem.
> Seems as I did not realize you have to be connect to the remote node first before you enter ILINK4.. Is that the case?
> Once I connected to the one node first and then issued the macro, it all seemed to work.
> Otherwise the macro was executing on the local node.. Make sense?
>  
> From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Lu Vencl
> Sent: Tuesday, November 01, 2011 6:35 AM
> To: 'Tim Sawyer'; 'app_rpt list'
> Subject: Re: [App_rpt-users] ilink 4 issue
>  
> Hey Tim,
> I tried this using CLI to ensure it was not a DTMF issue etc.  Same issue.
> Odd thing is that it is working now.. This happens from time to time for no reason and if I reboot the box it starts to work again most of the time..
> At the moment it is working fine. Next time it happens, I will do some more digging.
> Thanks again!
> Lu
> KA4EPS
>  
> From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Tim Sawyer
> Sent: Monday, October 31, 2011 8:54 PM
> To: app_rpt list
> Subject: Re: [App_rpt-users] ilink 4 issue
>  
> I assume that you can connect to the remote node ok before attempting to control it. 
>  
> Ssh in to your node and start the asterisk console, ie do "asterisk -rvvv". Then press your touch tones. You should see the correct tones on the asterisk  console.
>  
> If that looks ok, you might check and see if you're still connected. Do a "rpt lstats node#". 
> --
> Tim
> :wq
>  
> On Oct 31, 2011, at 4:48 PM, Lu Vencl wrote:
>  
> 
> Nothing at all.  
> 
> Sent from my iPhone, Lu Vencl
> 
> On Oct 31, 2011, at 6:17 PM, Tim Sawyer <tim.sawyer at me.com> wrote:
> 
> So what happens when you do *4 + the remote node number?
> --
> Tim
> :wq
>  
> On Oct 30, 2011, at 3:54 PM, Lu Vencl wrote:
>  
> 
> Been having an issue over the past several days where I can no longer execute ILINK4 to remotely control some of my other nodes.
> If I reboot the node, it most of the time will correct the issue.
> The other odd notable is that the CW tone frequency seems to go back to the default frequency as well.
> Any thoughts on what might be happening?
>  
> Thanks
> Lu
> KA4EPS
>  
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>  
>  

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20111103/ce2ad4c0/attachment.html>