[App_rpt-users] first node and newbie help

[Little Denver]

Just did that, no tones show up. Just traffic from echolink, a directory
download.
On Nov 7, 2011 4:28 PM, "Tim Sawyer" <tim.sawyer at me.com> wrote:

> Did you make the node half duplex when you set it up on the site?
>
> Login and do "asterisk -rvvv". That puts you at the asterisk DLI with
> verbose level 3 or better. Then make touch tones from the remote radio to
> the node radio and you should see the touchtones on your screen.
>
> --
> Tim
>
> On Nov 7, 2011, at 3:55 PM, Little Denver wrote:
>
> So my dad and i are trying to get a mini itx setup for the 5th wheel so he
> can use it when he travels. We set up the information on allstarlink's web
> site, installed acid, got the download and config file done, connected the
> uri ( green light is flashing ), followed the schematic for connection
> frs/grms so we could use a spare ft-60 ( since he is just going from his
> pickup to the 5th wheel ) booted up the machine and are unable to get any
> return commands. the node shows to be active, 28134. we can communicate
> from one radio to another, but nothing is returned. even when we request
> time or system info. any help advice or trick would be greatly appreciated
>
> --
> Thanks & 73,
> Denver Little
> KF5EFG
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20111107/f7177b75/attachment.html>