[App_rpt-users] How to attach URI to exsisting Cat 300 Controller

[Tim Sawyer]

You hook the the PTT of the URI to the COR of the controller and visa-virsa.

CNTRL   URI
PTT -> COR
COR <- PTT
TX -> RX
RX <- TX

Also read http://ohnosec.org/drupal/node/84
--
Tim
:wq

On Nov 11, 2011, at 10:51 AM, Brian Williams wrote:

> I would like to know how to go about hooking up a URI to the link port of the CAT 300 controller.
> 
> We have a remote site and the computer went down, so I want to put the Cat controller back in place and still have Allstar connection.
> 
> The problem I have is the link port has to see a COR from the link Device (usually a Radio) . How do I get COR from the URI?? so that port 1 will send transmit signal to Repeater TX??
> 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20111111/b3e39354/attachment.html>