[App_rpt-users] node list lookups

[George Csahanin]

I have two nodes running here at my house, one is 2360, IP 65.68.232.25, one 
is an unlisted one, so to speak (1998) on 192.168.0.132

This gets complicated. 65.68.232.25 nats thru the router to 192.168.1.111, 
the box REAL address. I need to make a connection from 1998 on an inside 
address to 2360, but the directory address is 65.68.232.25. The inside 
addresses cannot see that address. Something with the router...and no one 
has been able to figure it out...it just is that way. However, I put a line 
in rpt,conf with this line: 2360 = radio at 192.168.1.111/2360,NONE, this under 
[nodes]

But when I go to connect from 1998 to 2360 it still won't, leading me to 
think that app_rpt, etc forst looks at the downloaded list and then at 
[nodes]. Is this correct? If so I'll just have to live with it. But if there 
is a way to make it look at [nodes] first, then the downloaded 
directory...etc. Kinda like hosts, bind in /etc/host.conf

Any thoughts on this?

Thanks everyone.

GeorgeC
Node 2360/2428



George J Csahanin
W2DB
Cedar Park, TX