[App_rpt-users] node list lookups

[Ken]

George
Two nodes on the same box, or two boxes?

If there are two boxes you may want to try giving them different port
numbers using the 'bindport' parameter (with port pass though in the
router).

Is it that they cannot "see" each other? or just that the connect fails? If
it is the latter, have you put the node numbers in "extensions"?


[radio-secure]
exten => (first node)
exten => (second node)
 
GL
Ken




> -----Original Message-----
> From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-
> bounces at ohnosec.org] On Behalf Of George Csahanin
> Sent: Sunday, November 20, 2011 7:59 PM
> To: app_rpt-users at ohnosec.org
> Subject: [App_rpt-users] node list lookups
> 
> I have two nodes running here at my house, one is 2360, IP
> 65.68.232.25, one is an unlisted one, so to speak (1998) on
> 192.168.0.132
> 
> This gets complicated. 65.68.232.25 nats thru the router to
> 192.168.1.111, the box REAL address. I need to make a connection from
> 1998 on an inside address to 2360, but the directory address is
> 65.68.232.25. The inside addresses cannot see that address. Something
> with the router...and no one has been able to figure it out...it just
> is that way. However, I put a line in rpt,conf with this line: 2360 =
> radio at 192.168.1.111/2360,NONE, this under [nodes]
> 
> But when I go to connect from 1998 to 2360 it still won't, leading me
> to think that app_rpt, etc forst looks at the downloaded list and then
> at [nodes]. Is this correct? If so I'll just have to live with it. But
> if there is a way to make it look at [nodes] first, then the downloaded
> directory...etc. Kinda like hosts, bind in /etc/host.conf
> 
> Any thoughts on this?
> 
> Thanks everyone.
> 
> GeorgeC
> Node 2360/2428
> 
> 
> 
> George J Csahanin
> W2DB
> Cedar Park, TX
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users