[App_rpt-users] node list lookups

[George Csahanin]

Tim, I had the nodes stanza correct as you indicate, it just didn't work.

but

Got it workinmg after a chat with Steve Agee

He was mentioning port numbers, so this AM looked at the two node stanzas 
again and noticed a difference.

In http://ohnosec.org/drupal/node/41 the info is incorrect.

It shows this:

[nodes]
1234 = radio at 127.0.0.1/1234,NONE,y ; Remote base node
5678 = radio at 127.0.0.1/5678,NONE ; Standard nodeThe mentioning of ports got 
me thinking and I looked at the 1998 node stanza in rpt.conf. In the older 
system (2360) there is a port number after the ip address:
1998 = radio at 192.168.0.132:4569/1998,NONE

in 1998 the reverse was not true to get to 2360:
2360 = radio at 192.168.1.111/2360,NONE <-------agrees with the documentation, 
though

changed it to:
2360 = radio at 192.168.1.111:4569/2360,NONE <-----------added port number as 
in my older distro on 2360 box


Works fine.

Thanks for the input, guys.
Especially Steve who connected to my radio last night and we had a great 
chat about it.

GeorgeC
W2DB
2360



----- Original Message ----- 
From: "Tim Sawyer" <tim.sawyer at me.com>
To: "George Csahanin" <george at dyb.com>
Cc: <app_rpt-users at ohnosec.org>
Sent: Sunday, November 20, 2011 7:46 PM
Subject: Re: [App_rpt-users] node list lookups


> For private networks you have to specify the all other node(s) in each 
> node's node stanza. ie
>
> 2360 ip 111 has
> [nodes]
> 2360 = radio at 127.0.0.1/2360,NONE
> 1998 = radio at 192.168.1.132/1998,NONE
>
> and 1998 ip 132 has
> [nodes]
> 1998 = radio at 127.0.0.1/1998,NONE
> 2360 = radio at 192.168.1.111/2360,NONE
>
>
> --
> Tim
> :wq
>
> On Nov 20, 2011, at 4:59 PM, George Csahanin wrote:
>
>> I have two nodes running here at my house, one is 2360, IP 65.68.232.25, 
>> one is an unlisted one, so to speak (1998) on 192.168.0.132
>>
>> This gets complicated. 65.68.232.25 nats thru the router to 
>> 192.168.1.111, the box REAL address. I need to make a connection from 
>> 1998 on an inside address to 2360, but the directory address is 
>> 65.68.232.25. The inside addresses cannot see that address. Something 
>> with the router...and no one has been able to figure it out...it just is 
>> that way. However, I put a line in rpt,conf with this line: 2360 = 
>> radio at 192.168.1.111/2360,NONE, this under [nodes]
>>
>> But when I go to connect from 1998 to 2360 it still won't, leading me to 
>> think that app_rpt, etc forst looks at the downloaded list and then at 
>> [nodes]. Is this correct? If so I'll just have to live with it. But if 
>> there is a way to make it look at [nodes] first, then the downloaded 
>> directory...etc. Kinda like hosts, bind in /etc/host.conf
>>
>> Any thoughts on this?
>>
>> Thanks everyone.
>>
>> GeorgeC
>> Node 2360/2428
>>
>>
>>
>> George J Csahanin
>> W2DB
>> Cedar Park, TX
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>