[App_rpt-users] IAX Register

[Ramesh Dhami (VA3UV)]

I should have also mentioned, that when I look-up my IP from the command 
line, I do get the correct IP...

My hostname also resolves to the correct IP.

The problem is specific to the route that it takes to the Allstar server.


Odd thing is that I also have my FREE STAR* HP Thin Client at the same 
site on the same router (NAT'd to the same WAN IP) and that uses the 
correct IP when connecting to external reflectors, etc!

The problem seems to be specific to the route that the app_rpt box takes 
to report to the Allstar network (may be this is something that I need 
to take up with the host controlling the OSPF routing table?)


R.


On 27/11/2011 9:19 AM, Ramesh Dhami (VA3UV) wrote:
> Hi Guys;
>
> Moved one of my boxes to a new site that uses OSPF routing. The host has
> allocated me with a static IP; I have my own Linksys router for firewall
> and port forwarding.
>
> Now the problem is that my Allstar nodes are reporting to the Allstar
> network with the incorrect IP address. Since that particular IP address
> does not have port 4569 open, my nodes do not show up on the Allstar
> status page.
>
> So, I'd like to try and force the IP that gets reported to the Allstar
> network. I was looking at the [general] stanza in the iax.conf file
> while looking at this reference:
>
> http://www.voip-info.org/wiki/view/Asterisk+config+iax.conf
>
> .. but unfortunately, the 'externip' parameter can not be used in the
> [general] stanza. Is there any other way that will allow me to force the
> 'external IP'?
>
> When I use iaxRpt from my notebook and spec' the correct IP / hostname,
> I can connect without an issue, which confirms that port 4569 is open on
> the 'correct' IP address.
>
> Appreciate some help with this one!
>
> Thanks,
>
> Ramesh.
>
> www.freestar.us
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users