[App_rpt-users] TX Delay??

[Matt Beasant]

Hi Travis,

In rpt.conf there is a section called wait-times.

Here is a copy of the section I have in my rpt.conf file:

(located in the node definition stanza near the top of rpt.conf, under the
node number)
wait_times=wait-times ; Wait times

(then located between the [morse] stanza and the [node] stanza)


;
; This section allows wait times for telemetry events to be adjusted
; A section for wait times can be defined for every repeater
;

[wait-times]

telemwait=500                          ; Time to wait before sending most
telemetry
idwait=500                              ; Time to wait before starting ID
unkeywait=500                          ; Time to wait after unkey before
sending CT's and link telemetry
calltermwait=2000                       ; Time to wait before announcing
"call terminated"

Adjust the telemwait delay to suit your needs.

Cheers

Matt
G4RKY


On 1 October 2011 23:34, Travis Best <w3tmb1 at gmail.com> wrote:

> Is there a way to delay the messages the XIPAR server put over the air??
> The problem I am having is for example if I send the *81 command to get the
> current time I will only hear the min's because it is not keyed up long
> enough before it starts talking.
>
> Thanks
> for any help
> W3TMB
> Travis
> ______________________________**_________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/**mailman/listinfo/app_rpt-users<http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20111002/2c4445aa/attachment.html>