[App_rpt-users] for those Limey Linux and or D525MW users who are brave enough

[Jim Duuuude]

Yes, the same way all of the distros have for a while now. All the distros "support" chan_usbradio with full dsp,
however the VIA motherboards and some of the older i686 ones dont have enough
CPU power.

Certainly all the ATOM-based boards and even some earlier ones will do at least 2 channels
and even the newer dual-core ATOMs should do more.

JIM

Date: Thu, 6 Oct 2011 10:19:51 -0400
From: jrorke at cogeco.ca
To: app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] for those Limey Linux and or D525MW users who are brave enough


  


    
  
  
    Hi Jim, does this new Limey distro support chan_usbradio full dsp, 
    full duplex and can it support multi nodes? 

    

    Thanks

    

    Jon VA3RQ

    

    On 10/6/2011 9:46 AM, Jim Duuuude wrote:
    
      
      
        I have compiled a test version of Limey Linux version 1.1.5 that
        appears

        to properly support the new Intel D525MW Atom motherboard.

        

        This is an 'augmented' version of the i686-suported-1.1.5
        release, so

        it *should* work on all the previously-supported i686
        processors, also.

        

        There were some rather major changes (necessary to support SATA

        interfaces) in the hard disk driver stuff (even for those MB's
        that only

        have IDE), so it would be nice if some people could verify that
        this still

        works on non-D525MW motherboards (at least the ones that work in

        the normal release).

        

        I have tested this release on both a D525MW and the D945GCLF
        series

        motherboards, and it seems to work just fine.

        

        Also, if you have 5 minutes to wait for it to boot (since the
        SWINE boot loader does

        not support anything faster then USB 1.1 speed, YUCH!), you can
        flash

        the distro onto a USB pen drive (>= 128 MB), and it will
        work. Once the

        OS loads, it runs at full speed, just the initial boot load is
        PAINFULLY slow.

        

        If you dare, here is the URL for this version:

        

        

http://stats.allstarlink.org/limeylinux/downloads/cfimg-D525MW-1.1.5.tar.gz

        

        JIM WB6NIL

        

        

        

        

      
      

      
      

      _______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

    
  


_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20111006/18fd29f8/attachment.html>