[App_rpt-users] Female Voice too loud

[Jesse Royall]

Yes I am running Flat TX (Pin5)
The Radio is doing all the ENC/DEC
Running simpleusb.conf so there are no extra settings for PL. I am downloading from the web my conf files. And I think I may have a bad profile on the web so will be looking into the conf files from the machine now.

I talked to Bob (W5EVH) and my audio got crummy after 10 mins of talking. So we are thinking its a bad Motorola or a flaky one. 

Tried Tim's recommendation and simpleusb-tune-menu seems to have fixed her!

Thanks guys.


________________________________
From: Lu Vencl <vencl at att.net>
To: 'app_rpt list' <app_rpt-users at ohnosec.org>
Sent: Saturday, October 29, 2011 5:11 AM
Subject: Re: [App_rpt-users] Female Voice too loud


Are you running your TX audio to the flat input or mic input?
If you are running the mic input and not relying on the PL encoder on the radio and trying to send PL into the radio via mic, this will cause problems.
Be sure to use the flat TX input.. If not, then change the radio to encode PL and turn the PL off on the URI side.
Lu
KA4EPS
From:app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Tim Sawyer
Sent: Saturday, October 29, 2011 1:15 AM
To: app_rpt list
Subject: Re: [App_rpt-users] Female Voice too loud
 
Try simpleusb-tune-menu 
--
Tim
:wq
 
On Oct 28, 2011, at 8:33 PM, Jesse Royall wrote:


Female voice is too loud on the system. Sometimes she overides the PL tone and causes clipping.
 
Is there a way to turn her down? OR even a way to adjust the audio perimiters?
 
Running simpleusb setup. GM300. DMK.URI
No radio tune menu so I can't adjust the audio in simpleusb mode.
 
When running radio-tune-menu
Error parsing device parameters
 
Tried copying txmixaset=500 perimeter into the simpleusb.conf and no changes. Tried changing to lower value no change.
CLI error on simpleusb_tune_usb27978.conf 
cp simpleusb.conf simpleusb_tune_usb27987.conf and no changes
doubled checked the txmixaset=500 and added that again with no change.
 
Running outa ideas. 
 
_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
 
_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20111029/8fa5feec/attachment.html>