[App_rpt-users] Female Voice too loud

[Steve Passmore]

Isn't simpleusb for use with processed audio, not flat.  Otherwise you'd 
be sending other nodes your flat, i.e. non-de-emphasized audio.
I would think the female voice would be somewhat muddy sounding as it is 
not being pre-emhasized  by the radio.  Probably also throwing off your 
levels as well.

Steve

On 10/29/2011 14:23, Jesse Royall wrote:
> Yes I am running Flat TX (Pin5)
> The Radio is doing all the ENC/DEC
> Running simpleusb.conf so there are no extra settings for PL. I am 
> downloading from the web my conf files. And I think I may have a bad 
> profile on the web so will be looking into the conf files from the 
> machine now.
>
> I talked to Bob (W5EVH) and my audio got crummy after 10 mins of 
> talking. So we are thinking its a bad Motorola or a flaky one.
>
> Tried Tim's recommendation and simpleusb-tune-menu seems to have fixed 
> her!
>
> Thanks guys.
>
> ------------------------------------------------------------------------
> *From:* Lu Vencl <vencl at att.net>
> *To:* 'app_rpt list' <app_rpt-users at ohnosec.org>
> *Sent:* Saturday, October 29, 2011 5:11 AM
> *Subject:* Re: [App_rpt-users] Female Voice too loud
>
> Are you running your TX audio to the flat input or mic input?
> If you are running the mic input and not relying on the PL encoder on 
> the radio and trying to send PL into the radio via mic, this will 
> cause problems.
> Be sure to use the flat TX input.. If not, then change the radio to 
> encode PL and turn the PL off on the URI side.
> Lu
> KA4EPS
> *From:*app_rpt-users-bounces at ohnosec.org 
> [mailto:app_rpt-users-bounces at ohnosec.org] *On Behalf Of *Tim Sawyer
> *Sent:* Saturday, October 29, 2011 1:15 AM
> *To:* app_rpt list
> *Subject:* Re: [App_rpt-users] Female Voice too loud
> Try simpleusb-tune-menu
> --
> Tim
> :wq
> On Oct 28, 2011, at 8:33 PM, Jesse Royall wrote:
>
>
> Female voice is too loud on the system. Sometimes she overides the PL 
> tone and causes clipping.
> Is there a way to turn her down? OR even a way to adjust the audio 
> perimiters?
> Running simpleusb setup. GM300. DMK.URI
> No radio tune menu so I can't adjust the audio in simpleusb mode.
> When running radio-tune-menu
> Error parsing device parameters
> Tried copying txmixaset=500 perimeter into the simpleusb.conf and no 
> changes. Tried changing to lower value no change.
> CLI error on simpleusb_tune_usb27978.conf
> cp simpleusb.conf simpleusb_tune_usb27987.conf and no changes
> doubled checked the txmixaset=500 and added that again with no change.
> Running outa ideas.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20111029/a17120f2/attachment.html>