[App_rpt-users] Syntor X Remote Base

[Tim Sawyer]

Xcat and app_rpt are using the CI-V protocol. So, it's txd -> rxd and rxd -> txd. No clock and data involved.
--
Tim
:wq

On Oct 30, 2011, at 8:48 PM, Monty wrote:

> Data -> txd
> Clock -> rxd
> 
> or vise versa?
> 
> Monty
> 
> 
> On Sun, Oct 30, 2011 at 8:55 AM, Tim Sawyer <tim.sawyer at me.com> wrote:
> Nothing to it, just rxd and txd.
> --
> Tim
> :wq
> 
> On Oct 29, 2011, at 11:36 PM, Monty wrote:
> 
>> Nice! Thanks Tim.  I just got the Xcat all wired up and I am able to control with the Xcat PC program. Do you have a pinout for how to connect the data lines to the Allstar PC's serial port?
>> 
>> Monty
>> 
>> 
>> On Fri, Oct 28, 2011 at 6:49 PM, Tim Sawyer <tim.sawyer at me.com> wrote:
>> Yes! Here's the applicable settings from the rpt.conf node stanza:
>> 
>> [your node number]
>> rxchannel = Simpleusb/usb               ; Rx audio/signalling channel
>> remote = xcat
>> civaddr = 32
>> functions = functions-remote
>> ;lconn = PP3=1
>> ;ldisc = PP3=0
>> memory = memory                         ; Section to hold memory entries (optional)
>>                                        ; remote=ft897 for Yaesu FT-897 or
>>                                        ; remote=rbi for Doug Hall RBI1
>>                                        ; remote=kenwood for Kenwood mobiles such as the TMG707A
>>                                        ; remote=ic706 for the Icom IC-706
>> ioport = /dev/ttyS0                     ; Specify port for serial port (optional)
>> iospeed = 19200
>> dusbabek = yes                 ; either you need it or you don't
>> 
>> ;iobase = 0x378                         ; Specify IO port for parallel port (optional)
>> authlevel = 2                           ; Remote base authentication level
>> ;; authlevel = 0 : Anyone can use it
>> ;; authlevel = 1 : Requires log in, Waits for Tx key to ask for it
>> ;; authlevel = 2 : Requires log in, asks for it automously
>> ;mars = 0                   ; set=1 for IC-706 w/MARS mods (optional)
>> 
>> remote_inact_timeout=0             ; Inactivity timer for remote base nodes only (set to 0 to disable).
>> remote_timeout=5400                  ; Session time out for remote base. (set to 0 to disable)
>> 
>> 
>> --
>> Tim
>> :wq
>> 
>> On Oct 28, 2011, at 2:23 PM, Monty wrote:
>> 
>> > Hello Everyone,
>> > I am wondering if anyone on the list has successfully integrated a Syntor X with an Xcat to app_rpt?  I have 2m and a 10m/6m flavor.  Would the 10m/6m have trouble?
>> >
>> > Monty
>> > _______________________________________________
>> > App_rpt-users mailing list
>> > App_rpt-users at ohnosec.org
>> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
> 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20111031/e805f7bd/attachment.html>