[App_rpt-users] Syntor X Remote Base

[Tim Sawyer]

Nothing to it, just rxd and txd.
--
Tim
:wq

On Oct 29, 2011, at 11:36 PM, Monty wrote:

> Nice! Thanks Tim.  I just got the Xcat all wired up and I am able to control with the Xcat PC program. Do you have a pinout for how to connect the data lines to the Allstar PC's serial port?
> 
> Monty
> 
> 
> On Fri, Oct 28, 2011 at 6:49 PM, Tim Sawyer <tim.sawyer at me.com> wrote:
> Yes! Here's the applicable settings from the rpt.conf node stanza:
> 
> [your node number]
> rxchannel = Simpleusb/usb               ; Rx audio/signalling channel
> remote = xcat
> civaddr = 32
> functions = functions-remote
> ;lconn = PP3=1
> ;ldisc = PP3=0
> memory = memory                         ; Section to hold memory entries (optional)
>                                        ; remote=ft897 for Yaesu FT-897 or
>                                        ; remote=rbi for Doug Hall RBI1
>                                        ; remote=kenwood for Kenwood mobiles such as the TMG707A
>                                        ; remote=ic706 for the Icom IC-706
> ioport = /dev/ttyS0                     ; Specify port for serial port (optional)
> iospeed = 19200
> dusbabek = yes                 ; either you need it or you don't
> 
> ;iobase = 0x378                         ; Specify IO port for parallel port (optional)
> authlevel = 2                           ; Remote base authentication level
> ;; authlevel = 0 : Anyone can use it
> ;; authlevel = 1 : Requires log in, Waits for Tx key to ask for it
> ;; authlevel = 2 : Requires log in, asks for it automously
> ;mars = 0                   ; set=1 for IC-706 w/MARS mods (optional)
> 
> remote_inact_timeout=0             ; Inactivity timer for remote base nodes only (set to 0 to disable).
> remote_timeout=5400                  ; Session time out for remote base. (set to 0 to disable)
> 
> 
> --
> Tim
> :wq
> 
> On Oct 28, 2011, at 2:23 PM, Monty wrote:
> 
> > Hello Everyone,
> > I am wondering if anyone on the list has successfully integrated a Syntor X with an Xcat to app_rpt?  I have 2m and a 10m/6m flavor.  Would the 10m/6m have trouble?
> >
> > Monty
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at ohnosec.org
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20111030/61c666af/attachment.html>