[App_rpt-users] Echolink test commands

[Bryan Boyle]

or, connection followed by non-clueful operator that has a weight on their space key and proceeds to repeatedly time out your machine(s).  

--
Bryan
Sent from my iPhone
please forgive misspellings...



On Sep 4, 2011, at 2:41 PM, Matt Beasant <g4rky at yahoo.co.uk> wrote:

> Amen
> 
> On 4 September 2011 18:01, Bote Man <bote_radio at botecomm.com> wrote:
> You'll know Echolink is working when you get the typical silent
> connection followed 2 seconds later by a disconnection. :-(
> 
> Bote
> 
> 
> > -----Original Message-----
> > From: Tony KT9AC
> > Sent: Sunday, 04 September, 2011 12:30
> >
> > Is there some Echolink test commands? We've got a new node up and
> > running but can't get Echolink to register. It's only seen as going
> > out
> > port 80 but nothing else. I've tried two different working config
> > files
> > and firewall settings are open from 5198 to 5200 TCP/UDP.
> >
> > Thanks,
> > Tony
> > _______________________________________________
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20110904/8896777e/attachment.html>