[App_rpt-users] Echolink test commands

[DougH]

Some say that is a router problem.....should that be user.....seems to be much more prevelant....authors take note!!
D  
  ----- Original Message ----- 
  From: Matt Beasant 
  To: Bote Man 
  Cc: App_rpt-users at ohnosec.org 
  Sent: Sunday, September 04, 2011 7:41 PM
  Subject: Re: [App_rpt-users] Echolink test commands


  Amen


  On 4 September 2011 18:01, Bote Man <bote_radio at botecomm.com> wrote:

    You'll know Echolink is working when you get the typical silent
    connection followed 2 seconds later by a disconnection. :-(

    Bote



    > -----Original Message-----
    > From: Tony KT9AC
    > Sent: Sunday, 04 September, 2011 12:30
    >
    > Is there some Echolink test commands? We've got a new node up and
    > running but can't get Echolink to register. It's only seen as going
    > out
    > port 80 but nothing else. I've tried two different working config
    > files
    > and firewall settings are open from 5198 to 5200 TCP/UDP.
    >
    > Thanks,
    > Tony
    > _______________________________________________

    _______________________________________________
    App_rpt-users mailing list
    App_rpt-users at ohnosec.org
    http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users





------------------------------------------------------------------------------


  _______________________________________________
  App_rpt-users mailing list
  App_rpt-users at ohnosec.org
  http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20110904/ce37a07a/attachment.html>