[App_rpt-users] MICOR rejuvenation (was: Price)

[Bote Man]

1) Remove all the boards, including the cards in the control shelf.

2) Spray all MICOR board connector pins with the recommended suite of
Caig Labs "DeOxit" sprays, one to clean, the other to protect.
http://www.caig.com/

3) Re-insert boards.

4) Be happy.

Bote


> -----Original Message-----
> From: Bryan D. Boyle
> Sent: Tuesday, 13 September, 2011 13:31
> Subject: [App_rpt-users] Price
> 
> thinking of selling off my systems...just don't have the 'oomph' to
keep
> them up, and the micor is a constant source of headaches (add-in
squelch
> board just goes brain dead and cuts out; sometimes the t/r relay will
> not activate, even when activating the PTT pin on the external
> interface...thumping the center board usually brings it back...it has
a
> rushing noise on rf repeat, sounds like a 'woosh' when the machine
keys
> up...).  Just running out of patience, and, to be honest, the whining
of
> users.  Get enough of that from the XYL and work colleagues.
>