[App_rpt-users] Connecting to my node from web transceiver

[George Csahanin]

What I'd love to know is what is needed in those two files to allow access. 
I don't use web portal setup as I have some things that are custom on my 
nodes, and downloading setup always blows out that stuff. I can access by 
phone access, just not web xcvr...

GeorgeC
W2DB
2360

-----Original Message----- 
From: Peter Dahl
Sent: Friday, September 23, 2011 6:23 PM
Cc: App_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] Connecting to my node from web transceiver

Ken,
Yes, I have enabled User Access via Web Transceiver on the portal
settings and the allstar-public stanza is present in both iax.conf and
extensions.conf.

Peter


On Sep 23, 2011, at 4:08 PM, Ken wrote:

> This works fine on my system
>
> Have you enabled "User Access via Web Transceiver" on the Access  Settings
> menu of the Allstar Node Configuration at the portal?
>
> I find that I cannot connect to your system either.
>
> Does the iax.conf file on your repeater have a [allstar-public]  stanza?
>
> Does the extensions.conf file have a stanza of the same name?
>
> 73
> Ken
>
>
>> -----Original Message-----
>> From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-
>> bounces at ohnosec.org] On Behalf Of Michael Carey
>> Sent: Friday, September 23, 2011 6:29 PM
>> To: Peter Dahl
>> Cc: App_rpt-users at ohnosec.org
>> Subject: Re: [App_rpt-users] Connecting to my node from web  transceiver
>>
>> Is there an "issue" using the web transceiver on the same internet
>> service/connection that the node is on?  This is something I have
>> wondered about but not ever tested.
>>
>> Michael.
>> VK5ZEA
>>
>> On 24/09/2011 07:47, Peter Dahl wrote:
>>> My node , 27595 appears to be fully operational now and ready to be
>>> deployed on the air finally except I have one burning question. I  can
>>> control and access my node both locally and through the phone portal
>>> but not with the web transceiver. When I access most other nodes
>>> through the web transceiver I am immediately connected to them and
>>> the image of the keypad on the web page is active. When I access my
>>> node through the web transceiver the "keypad" stays inactive and the
>>> audible connection message does not  play. What am I missing? Can
>>> someone please assist me with this final configuration of my node?
>>>
>>> Thanks in advance!
>>>
>>> Peter, WA7FUS,  Node 27595 Brier, WA
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>