[App_rpt-users] Connecting to my node from web transceiver "CURL not registered"

[Jim Duuuude]

are you using a current version (like in the last 2 years or so) of
ACID (or Limey). Obviously you have something either old or
non-standard, since your asterisk obviously is not compiled with
'curl' support. If you are running a Centos/RHEL/Fedora
distro you can 'yum -y install curl-devel' and then
COMPLETELY re-install asterisk (especially including the
./configure step).

JIM

> From: george at dyb.com
> To: pd_fus at me.com
> Date: Sat, 24 Sep 2011 12:16:22 -0500
> CC: App_rpt-users at ohnosec.org
> Subject: Re: [App_rpt-users] Connecting to my node from web transceiver	"CURL not registered"
> 
> I just checked again, and forgot to mention I get the console info:
> 
> Verbosity is at least 3
>     -- Accepting AUTHENTICATED call from 69.249.206.186:
>        > requested format = ulaw,
>        > requested prefs = (ulaw),
>        > actual format = ulaw,
>        > host prefs = (ulaw|gsm),
>        > priority = mine
>     -- Executing [s at allstar-public:1] Ringing("IAX2/allstar-public-13093", 
> "") in new stack
> [Sep 24 12:12:23] ERROR[16310]: pbx.c:1550 ast_func_read: Function CURL not 
> registered
>     -- Executing [s at allstar-public:2] Set("IAX2/allstar-public-13093", 
> "RESP=") in new stack
>     -- Executing [s at allstar-public:3] Set("IAX2/allstar-public-13093", 
> "NODENUM=2360") in new stack
>     -- Executing [s at allstar-public:4] GotoIf("IAX2/allstar-public-13093", 
> "0?hangit") in new stack
>     -- Executing [s at allstar-public:5] GotoIf("IAX2/allstar-public-13093", 
> "1?hangit") in new stack
>     -- Goto (allstar-public,s,15)
>     -- Executing [s at allstar-public:15] Answer("IAX2/allstar-public-13093", 
> "") in new stack
>     -- Executing [s at allstar-public:16] Wait("IAX2/allstar-public-13093", 
> "1") in new stack
>     -- Executing [s at allstar-public:17] Hangup("IAX2/allstar-public-13093", 
> "") in new stack
>   == Spawn extension (allstar-public, s, 17) exited non-zero on 
> 'IAX2/allstar-public-13093'
>     -- Hungup 'IAX2/allstar-public-13093
> 
> 
> What do I look for re: "Function CURL not registered"
> 
> GeorgeC
> 
> 
> 
> 
> 
> -----Original Message----- 
> From: Peter Dahl
> Sent: Friday, September 23, 2011 6:23 PM
> Cc: App_rpt-users at ohnosec.org
> Subject: Re: [App_rpt-users] Connecting to my node from web transceiver
> 
> Ken,
> Yes, I have enabled User Access via Web Transceiver on the portal
> settings and the allstar-public stanza is present in both iax.conf and
> extensions.conf.
> 
> Peter
> 
> 
> On Sep 23, 2011, at 4:08 PM, Ken wrote:
> 
> > This works fine on my system
> >
> > Have you enabled "User Access via Web Transceiver" on the Access  Settings
> > menu of the Allstar Node Configuration at the portal?
> >
> > I find that I cannot connect to your system either.
> >
> > Does the iax.conf file on your repeater have a [allstar-public]  stanza?
> >
> > Does the extensions.conf file have a stanza of the same name?
> >
> > 73
> > Ken
> >
> >
> >> -----Original Message-----
> >> From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-
> >> bounces at ohnosec.org] On Behalf Of Michael Carey
> >> Sent: Friday, September 23, 2011 6:29 PM
> >> To: Peter Dahl
> >> Cc: App_rpt-users at ohnosec.org
> >> Subject: Re: [App_rpt-users] Connecting to my node from web  transceiver
> >>
> >> Is there an "issue" using the web transceiver on the same internet
> >> service/connection that the node is on?  This is something I have
> >> wondered about but not ever tested.
> >>
> >> Michael.
> >> VK5ZEA
> >>
> >> On 24/09/2011 07:47, Peter Dahl wrote:
> >>> My node , 27595 appears to be fully operational now and ready to be
> >>> deployed on the air finally except I have one burning question. I  can
> >>> control and access my node both locally and through the phone portal
> >>> but not with the web transceiver. When I access most other nodes
> >>> through the web transceiver I am immediately connected to them and
> >>> the image of the keypad on the web page is active. When I access my
> >>> node through the web transceiver the "keypad" stays inactive and the
> >>> audible connection message does not  play. What am I missing? Can
> >>> someone please assist me with this final configuration of my node?
> >>>
> >>> Thanks in advance!
> >>>
> >>> Peter, WA7FUS,  Node 27595 Brier, WA
> >>> _______________________________________________
> >>> App_rpt-users mailing list
> >>> App_rpt-users at ohnosec.org
> >>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >>>
> >>
> >> _______________________________________________
> >> App_rpt-users mailing list
> >> App_rpt-users at ohnosec.org
> >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20110924/c2884adc/attachment.html>