[App_rpt-users] installation disk

[Corey Dean]

These are the ones I ordered when I started in this.  I ordered 3 and a friend ordered some as well.  They were all the wrong chip.  The newegg cm108's have worked everytime for me.

Corey N3FE
________________________________________
From: app_rpt-users-bounces at ohnosec.org [app_rpt-users-bounces at ohnosec.org] On Behalf Of George Csahanin [george at dyb.com]
Sent: Tuesday, September 27, 2011 10:15 PM
To: Tim Sawyer; App_rpt-users at ohnosec.org
Cc: Bradley Haney
Subject: Re: [App_rpt-users] installation disk

I've used these successfully

http://www.dealextreme.com/p/c-media-cm108-virtual-7-1-surround-usb-2-0-external-sound-card-with-hardware-volume-control-and-mute-21812

$6.99 sungle with shipping.

3 units for $6.04 each, 5 for $5.84 each, all includes shipping.

But (one more pitch) you do not need to modify if you just use the FOB for audio and use the parallel port for COR and PTT.

GeorgeC


----- Original Message -----
From: Tim Sawyer<mailto:tim.sawyer at me.com>
To: App_rpt-users at ohnosec.org<mailto:App_rpt-users at ohnosec.org>
Cc: Bradley Haney<mailto:kc9gqr at gmail.com>
Sent: Tuesday, September 27, 2011 8:09 PM
Subject: Re: [App_rpt-users] installation disk

No, your not spinning your wheels. Check out the URI at the URL below. Or if you'd rather roll your own the Startech (http://www.newegg.com/Product/Product.aspx?Item=N82E16829128004) is a viable option.

--
Tim

On Sep 27, 2011, at 12:18 PM, Bradley Haney wrote:

So i guess i am kind of spinning my wheels trying to load up a computer of this software if i can't interface  my radio  unless i have  a lox/beagle board .. WHen will the thin client be available?



On Tue, Sep 27, 2011 at 1:54 PM, Bradley Haney <kc9gqr at gmail.com<mailto:kc9gqr at gmail.com>> wrote:
OK  i thought it went throught the computer's sound card.


On Tue, Sep 27, 2011 at 12:55 PM, Tim Sawyer <tim.sawyer at me.com<mailto:tim.sawyer at me.com>> wrote:
The only supported audio is through USB, the too-expensive QuadPCI card, a LOX/Beagle board, or the soon to be released thin client.
--
Tim
:wq

On Sep 27, 2011, at 9:50 AM, Bradley Haney wrote:

Yep, no porblem wiping out the computer..  I will get a new   some new dvd's or cd's and try it again tonight  maybe that is the issue..   As for the interface  basically was just wanting to know if you can use a serial port instead of a USB port..

Thanks for your help.

On Tue, Sep 27, 2011 at 11:46 AM, Tim Sawyer <tim.sawyer at me.com<mailto:tim.sawyer at me.com>> wrote:
You are aware that the ACID install will wipe out your Windows load?

It doesn't mater if you drag it or click it as long as it shows up in the left pane of Disk Utility.

I don't think it maters that it's a 32 bit motherboard.

I don't know what a rascall interface is. Interfaces which I know to work are the DMK Engineering URI (http://dmkeng.com/URI_Order_Page.htm), modified USB sound fobs as detailed on the Drupal web site (http://ohnosec.org/drupal/node/27) and PLRI board (http://www.qsl.net/k0kn/plri.html)

Most of this stuff is documented on either https://allstarlink.org/ or http://ohnosec.org/drupal/

Let us know how it goes.
--
Tim
:wq

On Sep 27, 2011, at 7:41 AM, Bradley Haney wrote:

i will try it that way of  dragging it..  I used the disk utility  but i think  i clicked on the DMG image and burned that..  I will give it another shot.. The computer i am using is a compaq computer that  has  windows xp  but its a 32 bit  mother board will that matter?    Also will i be able to use my rascall interface or will i have to purchase a different adapter..

On Tue, Sep 27, 2011 at 8:30 AM, Tim Sawyer <tim.sawyer at me.com<mailto:tim.sawyer at me.com>> wrote:
Did you use the Disk Utility application to burn the iso image or the Finder? Finder will just copy the image onto the CD, which won't be bootable. Open Disk Utility and then drag the iso image into the left pane, make sure it is highlighted and press the burn icon.

--
Tim

On Sep 26, 2011, at 8:54 PM, Bradley Haney wrote:

For some reason i burned the iso image on my mac and put the new dvd in the windows computer to load up but for some reason it tries to read and then does nothing.. I have already went into the bios to set up to boot from CD rom  but no joy..  I then booted that machine into windows and i was able to read the disk so i know the DVD drive is working but still can't get the computer to boot ..  is there a installation disc i can just purchase.  also has anyone used a rascal interface with this system?

Bradley Kc9gqr
_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org<mailto:App_rpt-users at ohnosec.org>
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users









--
This message was scanned and is believed to be clean.
Click here to report this message as spam.<http://simba.repeater.net:8080/cgi-bin/learn-msg.cgi?id=73D042956.A8287>