[App_rpt-users] New installation trouble...

[Ken]

If you have no URI, you need to set:
rxchannel = Zap/pseudo
in rpt.conf


Ken

> -----Original Message-----
> From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-
> bounces at ohnosec.org] On Behalf Of Jeffrey S. Carrier
> Sent: Monday, April 09, 2012 4:41 AM
> To: app_rpt-users at ohnosec.org
> Subject: Re: [App_rpt-users] New installation trouble...
> 
> Don,
> 
> I "think" you need to have a URI or some variant connected but I see the
> same error about twice a week on one of my two boxes.  A restart usually
> takes care of it.  I never saw this on the initial installation.
> 
> K0JSC
> 
> -----Original Message-----
> From: app_rpt-users-bounces at ohnosec.org
> [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Don Hackler
> Sent: Monday, April 09, 2012 2:25 AM
> To: app_rpt-users at ohnosec.org
> Subject: [App_rpt-users] New installation trouble...
> 
> I'm bringing up a new server using the ACID distro.
> I don't have any radio or URI hardware attached.
> I haven't done any allstar server/node/password configuration...
> 
> As soon as the server reboots after the installation is complete, asterisk
> keeps restarting.
> 
> Each time Asterisk fires up, it bombs out with error 1 and tries to
restart.
> The Asterisk logs complain that Zaptel is configured incorrectly.
> 
> /etc/zapata.conf  only has this section in it:
> 
> [channels]
> signalling=em_txrx
> group=9
> channel=psuedo
> 
> 
> 
> Any ideas?
> 
> = = = = =
> Also, the password setting function in the installation script doesn't
seem to
> work.
> I had to bust in with grub in single user mode and clear the root password
to
> get into the system at all.
> 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users